National metro investment exceeds RMB 1.5 trillion

According to statistics from the China Rail Transportation Association’s Urban Rail Transport Professional Committee, as of the end of September 2012, there are 15 cities in China that have opened urban rail transit lines in operation. There are a total of 59 operating lines and a total operating length of approximately 1,746 kilometers. The total number of 1143 seats.

Up to now, 35 cities in China have become involved with the subway. These cities include 4 municipalities directly under the Central Government, 5 cities in Shenzhen, Xiamen, Ningbo, Qingdao and Shenzhen, most of the provincial capital cities, and Suzhou, Dongguan, Wuxi and Changzhou. The large-scale prefecture-level cities basically include most of the first and second-tier cities in China.

According to incomplete statistics, there are currently more than 70 subway lines under construction throughout the country, with a total investment of more than 800 billion yuan. If we add approved projects, the investment will be more than 1.5 trillion yuan.

The development of large-scale subway construction is a great advantage for related industries. For example, in the procurement of vehicles, the annual sales of urban rail vehicles currently exceed 10 billion yuan. This market is basically split between China South Locomotive and China North Locomotive. "More and more cities are building subways, which will greatly benefit CSR's future development," said a senior figure of CSR.

It is worth noting that many of the current large subways are approved by the two rounds of investment peaks after 2008. Second-tier cities including Ningbo, Wuxi, Changsha, Zhengzhou and Fuzhou joined the subway construction at that time. As for the army, as of June 2009, plus the original cities, 23 cities have been approved for the construction of subways.

After the implementation of the “steady growth” policy in May last year, it ushered in an upsurge in the construction of metros. Among the 14 cities approved for planning after May last year, seven were from Changzhou, Xiamen, Lanzhou, Taiyuan, Shijiazhuang, Urumqi, and Xuzhou. For the first time, the city was allowed to build a subway.

Mao Baohua, director of the Urban Rail Transit Department of Beijing Jiaotong University, pointed out that the concentration of subways does indeed have the effect of promoting economic development and stabilizing growth. But more importantly, the current level of public transport infrastructure in large and medium-sized cities is very low and investment-driven is needed. Under the circumstances, investing money in this area and addressing the needs of ordinary people is the lowest risk option.

Injection Molding

What is Precision CNC Milling

In general, computer numerical control milling machine (CNC) machining is a deductive manufacturing technique that programs 3-axis linkage, complex to 5-axis linkage, drives milling cutters to remove layers from solid blocks called blanks to produce finished parts. CNC milling is one of the main types of CNC Machining, which uses cutting tools that rotate at a speed of several thousand to tens of thousands of revolutions per minute (RPM) to precisely remove materials to obtain parts with complex surfaces. In addition to milling, CNC machining is also equipped with drills, boring tools, thread cutters and other tools to complete different part features at once. CNC machining produces parts based on a computer-aided design (CAD) model that is sent to a CNC machine through computer-aided manufacturing (CAM) software.

CNC Machining centers developed from CNC milling machines. The biggest difference compare to CNC milling machines is that the machining center has the ability to automatically exchange machining tools, by installing tools for different purposes on the tool magazine, the machining tools on the spindle can be changed through the automatic tool changing device in a single clamping device to achieve a variety of machining functions.

CNC milling accuracy

CNC milling centers and high-Precision Machining centers. Ordinary machining center, resolution of 1μm, maximum feed speed of 15 ~ 25m / min, positioning accuracy of about 0μm. High-precision machining center, resolution of 0.1μm, maximum feed speed of 15 ~ 100m / min, positioning accuracy of about 2μm. Between 2 and 10 μm, with a ± 5 μm more, can be called precision grade. FCE equipped with different grade and different size CNC milling center. Take in to account into both economic and quality in parallel.

CNC Finishing surface treatment

Post-processing is the final step in the CNC machining process. In a quick guide, we offer a lot of surface treatments to complete your final parts and get them to meet strict specific requirements. It should be noted that in CNC machining, post-processing is in optional, as the quality of the machined parts is already very high.

Anodized

The anodizing process allows the part to obtain excellent corrosion resistance, increasing the hardness and wear resistance of the surface. Anodizing is also the most common pre-painting treatment, which can help the painted surface to obtain good adhesion. We typically apply two types of anodizing in our production: Type II, corrosion resistant; Type III is thicker, adding a layer of wear resistance. Both anodizing processes can achieve a variety of color effects.

Polishing

Grinding polish, it offers the fastest turnaround parts and does not require post-processing. The surface finish of the grinding part is equivalent to 125 um in Ra, and the requirements can be increased to 63, 32 or 16 um Ra. Minor tool marks may still be visible on the last part.

Powder coatings

Powder Coating is thermoplastic powder spraying directly on the processed part. The sprayed parts are then baked in an oven to form a durable, abrasion- and corrosion-resistant plastic coating. In the powder coating process, its color, brightness, surface roughness can be customized.

Shot blasting

Shot peening is the high-speed spraying of beads of different hardnesses and sizes onto the surface of the part. To get different textures and brightness of the surface. Since the surface has been hit by similar forging beads, the hardness and wear resistance of the surface have also been enhanced.

Design of CNC machining

CNC machining is a universal machining process, especially parts that can be cut and machined can be achieved through CNC, from simple shape shapes to complex curved structures. However, as with every manufacturing technique, CNC machining has some design limitations. We break them down as follows to ensure that your products are optimally designed to better fit the CNC machining process.

General Tolerance

When designing parts, the size of each part is different according to the application environment, working conditions, etc., and the requirements for the machining accuracy of the workpiece are also different. Although CNC machining can achieve very high machining accuracy, we should also be aware that demanding machining accuracy and accuracy (strict product tolerances) usually mean Longer production times and higher costs. If a specific tolerance is not specified in the product design, we recommend choosing at the following levels.

The highest precision of our equipment is 0.001, and the recommended most precise machining requirements do not exceed +/-0.005mm

Interior angle

All internal vertical edges of our products need to have rounded corners instead of right angles. This is because the tools used in CNC milling are cylindrical, which means they cannot produce inner right-angled edges. The fillet required by this process is called the inner corner fillet. When designing parts, the larger the inner corner fillet, the more efficient the production process. Because of the larger fillets, larger diameter milling cutters can be used to increase milling speed, and fewer swaps can be made to improve accuracy.

Undercut

Undercut cannot be machined with standard milling cutters, so the use of retract slots for parts should be avoided when designing CNC machined parts. In particular, for non-standard inner contour shapes, customized machining tools are required, which will greatly increase processing time and costs. Secondly, if undercut can not be avoided, due to the limited length of cnc tools, the undercut can not be too deep. If they are too deep or the location is difficult to reach, they will not be able to be produced because the CNC tool cannot reach the machining location.

Chamber wall thickness

CNC machining requires your part design to meet minimum wall thickness requirements. In general, it is recommended to choose the thickest possible and avoid very thin or characteristic walls. This is because CNC tools processing thin-walled parts will cause vibration deformation, which may cause interruptions or damage, and the size is out of specification. The standard minimum wall thickness for CNC machined metals is 0.030" (0.76 mm) and for plastics is 0.060" (1.5 mm).

Thread

When designing parts, it is useful to choose the largest possible thread size because smaller taps have a higher risk of breaking during production. If possible, avoid using deep hole threads as they lead to higher production costs, especially when custom tools are required.

Metal

In principle, materials with high hardness are easier to process because better processing accuracy can be obtained, but they are limited by the hardness of processing tools, so the hardness of the generally recommended parts is 8 ~ 60HRC, and for metal materials, the hardness is greater than stainless steel Followed by cast iron, followed by copper, and finally aluminum, while the processing of ceramics, plastics, etc. belongs to the processing of non-metallic materials. Fast production time.

Polymer

Although CNC can process thermoplastics, the material properties of polymers still have many difficulties for CNC processing. First, due to poor thermal conductivity, many thermoplastics melt or bend when in contact with CNC milling machines or drill bits. Secondly, the processing of plastics, because the hardness is low, the size accuracy caused by the knife during product clamping and processing is not high. For those parts that do not have special requirements for the strength and hardness of the metal, thermoplastics can provide a cheaper alternative.

Cost optimization of machined products

Simplify product design

Simplifying product design while taking into account functionality usually saves production time and reduces production costs. Because the manufacture of complex structures and surfaces often requires complex longer passes, more layering to obtain the same fine contour quality. This means higher production costs.

Reduce cutter changes

Using the same milling machine machining features, larger and same internal fillets, can reduce the number of tools used to reduce machining time. For example, if a workpiece needs a 10mm end face milling cutter to process some features, it also needs a spherical milling cutter to process a curved surface, and a 2mm milling cutter to process a fine groove, which will require repeated tool changes and reduce the machining efficiency

Proper material selection

The choice of raw material for machining can have a significant impact on production time and costs for CNC machining. If possible, choose a material with good processability, such as brass or aluminum. For those applications that do not require metal hardness and strength, CNC machining of engineering plastics like PMMA and ABS also helps to reduce costs because the material blank is cheaper, and the processing efficiency is higher.

Tolerance and wall thickness

Higher tolerances and thinner wall thicknesses also increase THE CORRESPONDING CNC machining costs, as it takes time to achieve higher precision cutting. If your product or component can accept a larger size range, choose a lower tolerance to reduce production time and costs. The same is true for wall thickness: a larger wall thickness margin should be chosen.

Choice of surface treatment

Surface treatment is often the final stage of the CNC machining process, which can also affect the cost of your entire project. Choosing less surface treatment for your part or product can lead to better time and cost efficiency. FCE can recommend to you how to optimize the surface treatment to balance the conflict between cost and quality according to your final needs.

FCE Machining services

FCE facilities are equipped with the most advanced and highest precision 3, 4 and 5-axis CNC machines, which allows us to complete your order in record time

1. 15+ year work experience engineers

2. Fastest 5 days delivery

3. Prototypes can be machined as quickly as 1 day.

4. More than 200 metals and plastics material available in stock

5. Tolerances as low as +-0.005mm

6. ISO 9001: 2015 certified factory

7. 40+ CNC machines

8. 50,000+ machined parts per month

We cooperated with many world top 500 companies and awarded good responds alway

Injection Molding,Plastic Injection,Plastic Molding,Custom Injection Molding

Suzhou FCE precision electronics Co., LTD , https://www.sjfukeyifcesz.com