Lift truck safety knowledge summary

No matter what the construction site is, there are some safety warning signs to warn each worker of the safety of work. If you are seeing someone hanging above the wires and maintaining the street lights at high altitude, when you light up the way home, you should say to the people's maintenance master that you have worked hard. High-altitude vehicles are often used in the high-altitude operation of municipal electric wires, street lighting maintenance, maintenance of high-rise exterior walls, billboard maintenance of highways, and so on. The chassis of a high-altitude vehicle consists of a chassis and a lift. Because of the need for long-term use and high-altitude operations, the required strength of the vehicle chassis and other common car chassis in the production process is higher. In order to ensure the safety factor of people who need to work at heights for a long period of time, their operators need to pass comprehensive safety knowledge training before they can perform on-the-job operations. The general safety knowledge about aerial vehicles is as follows:

1. When working on high-rise buildings or high-voltage lines, etc., it is important to note that the lifts need to maintain a safe distance, but if they have to be approached in some cases, they should be allowed to Other staff observed the surrounding conditions, conducted crowd evacuation, and maintained a normal call.

2. Operators of aerial platforms must wear prescribed safety clothing and related machinery while operating at high altitude to ensure that a good communication between the upper and lower staff, communication equipment, and communication gestures are also available. necessary. In addition, we must not wear safety clothing and machinery because of the low operating height. These common senses are basic safety awareness that must be known when working at heights. The personnel working at high altitude and the staff below must have better communication skills, equipped with communication equipment, and be familiar with communication gestures. Working at heights is a work that requires a 12-point caution, and every gesture misunderstanding used during the work process can cause unavoidable losses.

3, on time, regular inspection and maintenance of hydraulic systems Aerial lifts, braking systems. The brake system is also a safety guarantee for high-altitude vehicles. After the vehicle is stopped, the rear brake system must be turned on. The hydraulic system also includes a hydraulic tank and various high-pressure oil pipes. Carefully check the hydraulic oil is again and again missing. The position of the oil tank's oil level is used to judge whether or not the high pressure fuel pipe has deteriorated. The high pressure fuel pipe is often leaked on the outside and it is easy to age. Once the oil pipe is aged, the high pressure hose burst may occur, causing the elevator to suddenly Falling, eventually causing danger! Then check whether the link condition of each active joint of the lift is normal. If looseness occurs, it must be immediately tightened with tools. (Text / Sun Ni)

Auto Recovery High Speed Door

Advantages:
The advantage of Self Reparing High Speed Doors are self-reparing,easy to clean,complete safe,energy saving and so on.
If the door curtain comes out of its guides(for example in the event of impact with a forklift),the system will reset the cutrain back intp the guide during the next opening cycle autimatically

Auto Recovery High Speed Door, self-recovery high speed door, self-repair high speed door, high speed zipper door, zipper high speed door

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahss.com