Xugong XZJ5042JSQL4 truck crane truck
ã€The main technical parameters】 | |||
Product trademark | Xugong Brand | Announcement batch | 273 |
product name | XZJ5042JSQL4 truck crane truck | Product ID | ZLNZ84UL010 |
Total mass (Kg) | 4495 | Tank volume (m3) | |
Rated load quality (Kg) | 1225,1160,1510,1445 | Overall size (mm) | 5995×2065, 1900×2900,2834 |
Service quality (Kg) | 3140,2855 | Carriage size (mm) | 3590,3560×1805×380 |
Rated passenger (person) | The total weight of quasi trailers (Kg) | ||
Number of riders in the cab (person) | 2,3 | Load quality utilization factor | |
Approach / departure angle) | 27/18.5 | Front suspension/rear suspension (mm) | 1065/1570 |
Number of axes | 2 | Wheelbase (mm) | 3360 |
Axis load (Kg) | 1860/2635 | High speed (Km/h) | 100 |
other | Straight-arm crane model, rated lifting mass and weight (Kg): SQS22: 1100,900, folding arm crane model, rated lifting mass and weight (Kg): SQZ32: 1050,600. Side, rear protection The device is a metal guardrail, material Q235, connection method: bolt connection, section size: 100mm × 45mm, height from the ground: 525mm. Optional fence structure. Optional arm-type crane, optional cab format. Optional protective fence connection is welding. | ||
Regular sewage
The water tank of the sprinkler truck is provided with a sewage pipe. The inlet of the pipe is the low point of the water tank. After a period of use, the discharge pipe switch should be opened periodically to remove the accumulated debris from the tank until the water becomes clear.
Hubei Cheng Li Hot: Sprayer, Multi-function Sprinkler, Landscaping Sprinkler_, Water Tanker, Water Truck
Hubei Cheng Li sprinkler sprinkled before (spray), sprinkled, with side spray, tank with working platform, green sprinkler installed on the platform, the sprinkler can rotate in all directions, can be adjusted into a straight punch, heavy rain, light rain, Drizzle, with safety fence, equipped with Hangzhou Veyron high-power special sprinkler pump, ranked first in the national quality appraisal, the pump can be self-priming, self-priming, filter installation, fire protection interface, fire hydrant water inlet, with self-flow valve, Car optional 20 meters green reel, can spray pesticides, metal paint tank.
New detailed quotation and information, please call or visit the company's official website, to provide you with low-cost quality products, you are welcome to negotiate purchase!
The gantry swing system moves slowly or does not move
1. Check if there is something wrong with the truck crane hydraulic system;
2. Check the truck lift relief valve;
3. Check the manual control valve on the crane to see whether the valve stem can wear out, whether the valve can be damaged inside or not. See the situation and stop repairing;
4, check the truck crane slewing reducer to see if the gear or the bearing can get stuck, whether it can be lost due to serious wear and tear, the output shaft can be broken, look at the status of repair or change.
Suspended leg motion is slow or does not move
1. Check if there is something wrong with the truck crane hydraulic system;
2. Check whether the lifting valve of the truck is able to reduce the set pressure due to loosening of the adjusting screw. Can the valve seat be damaged or dusty on the outside surface of the valve? Can the valve be stuck in the open position? Can the needle valve wear out and the spring can be deformed? Or damage, see the situation stop adjusting or repairing;
3, check the truck hanging valve, see whether the valve stem wear, whether the valve can be deformed or damaged, look at the situation with the change; Fourth, check the leg cylinder, see if the piston can get stuck, the piston rod can be bent, Look at the situation and change.
First level maintenance
The inspection and maintenance of the parts that are liable to be carried by the truck crane, including cleaning, lubrication, part of the truck-mounted crane, and key disassembly, adjustment, etc., are generally assumed by the operator under the guidance of the full-time maintenance personnel.
With the car Yuchai engine: Yuchai engine and Cummins engine comparison, Yuchai's price is a little cheaper than Cummins, accessories are easy to buy, fuel consumption is lower than Cummins. Cummins is a joint-venture company. It is relatively expensive and relatively expensive. However, Cummins's maintenance rate is lower than that of Yuchai, and Cummins' engine sound is relatively small.
Also tell everyone how to identify the Yuchai engine model. Let's take the two engines YC4F90-30 and YC6J180-33.
The first part YC: Express the Chinese Pinyin abbreviation of Yuchai Engine.
The second part of the numbers 4 and 6:4 represent four-cylinder engines, and the six represents six-cylinder engines.
The third part F and J: The third part is usually represented by a letter, which represents the size of the engine bore, the size of the bore diameter is different from the different letters, the size of the bore diameter of each letter is not found in the data reference.
The fourth part 90 and 180: This represents the power of the engine, 90 horsepower and 180 horsepower, respectively, and 160 160 horsepower.
The fifth part 30 and 33: Here is the national three emission standards. If it is 20 or 21, it is the second national emission standard. The other 30 and 33 are also different. Although they are the same as the country's three emission standards, but 30 represents the country's three electricity. Jet engine, 31 represents the national three single pump engine, 33 represents the national three EGR engine.
[Company]: Cheng Li Special Purpose Vehicle Co., Ltd.
[Address]:
[mailbox]:
[faith]: 0722-3268188
[Business QQ]
[contact number]
[Sales Manager]: Manager Ai
[Zip Code]: 441300
[Company Address]: Chengli Automobile Industrial Park, South Plains, Suizhou City, Hubei Province
Acrylic Machined Parts Products
acrylic products, acrylic processing, customize acrylic, customized acrylic
Guangdong Hongwang New Materials Technology Co., Ltd , https://www.hwcncprocess.com