Installation precautions for pure water smart turbine flowmeter

Installation precautions for pure water smart turbine flowmeter
The smart turbine flowmeter is installed to work properly.
The installation precautions for intelligent turbine flowmeters are as follows:
1. Pay attention to the downstream installation when installing, that is, the direction of installation and the direction of liquid flow are the same, which is reflected by the direction of flow and the direction of the sensing arrow on the sensor.
2, the installation should take into account the upstream and downstream liquid flow rate, so the upstream access to the pipe mouth should be slightly larger, generally will require more than 20dn, the downstream pipe can also be too small, at least to ensure the normal circulation of liquid, need to be greater than 5dn
3. Install the sensor away from possible interference sources, such as external magnetic fields, or simply filter the external interference and add a protective cover to the sensor.
4, the sensor should not be installed in the open air, easy to enter the water, if you can not avoid the need for open-air installation, you need to waterproof the sensor plug
5. The data receiving line of the sensor should be selected according to the situation of the receiving end, so that the data can be received comprehensively.

Other Mining Machines

Some other types of mining machines include:

1. Dragline excavators: These are large machines used in surface mining operations to remove overburden (the soil and rock covering the mineral deposit) and extract the minerals.

2. Bucket-wheel excavators: These machines have a large wheel with buckets attached to it, which are used to scoop and remove large amounts of soil and rock in surface mining operations.

3. Underground mining equipment: This includes various machines used in underground mining operations, such as drill rigs, loaders, haul trucks, and roof bolters. These machines are specially designed to work in confined spaces and extract minerals from underground deposits.

4. Longwall mining machines: Longwall mining is a method used to extract coal from underground mines. It involves the use of a shearer machine, which cuts and removes the coal in a continuous process.

5. Continuous miners: These machines are used in underground mining operations to cut and extract coal or other minerals. They have a rotating drum with cutting teeth that scrape the material from the mine face.

6. Crushing and grinding machines: These machines are used in the processing of mined materials to break them down into smaller sizes. Crushers and mills are commonly used in this process.

7. Dredges: Dredges are machines used to extract minerals from underwater deposits, such as sand, gravel, or gold. They use a suction or bucket system to remove the material from the bottom of rivers, lakes, or oceans.

8. Trommels: Trommels are cylindrical machines used in placer mining operations to separate and classify materials based on their size. They have screens or perforated plates that allow smaller particles to pass through while larger ones are retained.

9. Jigs: Jigs are gravity separation devices used in mining operations to separate minerals based on their density. They work by pulsating water through a bed of material, causing heavier particles to settle while lighter ones are carried away.

10. Magnetic separators: These machines use magnets to separate magnetic minerals from non-magnetic ones. They are commonly used in the mining of iron ore and other magnetic minerals.

These are just a few examples of the many types of mining machines used in different mining operations. The specific machines used will depend on the type of mining being done, the characteristics of the mineral deposit, and other factors.

Other Mining Machines,Vibrating Screen Machine,Slag Tank Tipper,Mining Sintering Machine

Shenyang North Heavy Metallurgical Engineering Technology Co., Ltd. , https://www.nhmetallurgy.com

Posted on