Many car owners will encounter such problems. A lot of logo stickers are attached to the windshield in front of the car. Many of them are expired logo stickers. The new logo stickers must be attached. Sometimes they feel like big faces. . Seriously affect the appearance. It can't be torn by hand, and it can't be done by violent methods, which makes the owner more headache. Today, Beimai.com has a few small tricks for everyone . How to clear the expired logo on the car windshield, you can see the following article.
First, the physical elimination method
The physical elimination method is actually very simple. The tools are almost everywhere, and it is the hair dryer used for hairdressing. Huang Yana, the owner of the car, said that if the premise permits, use the long-term plug-in board to lead the power supply to the outside, plug in the hair dryer, and use the hot air to heat around the logo sticker. After a while, the various logos can be easily uncovered.
Second, once and for all
In the market today, there are tools for attaching logo stickers, such as electrostatic stickers or suction pads. The price of static electricity is not expensive, similar to the protection sticker that protects the screen of the mobile phone, but the size is slightly larger than the sticker. The owner can attach the sticker to the electrostatic sticker first, and then paste the static electricity on the front windshield. It is very strong and will not stick to the front windshield when removed. Electrostatic stickers are disposable, and suction pads are reusable. The suction cup sticker is similar to the ultra-thin photo frame, and the identification sticker is placed therein, and then the suction cup attached to the suction cup is used to fix it on the front windshield. Both types of tools are easy to install and easy to use. Although the electrostatic stickers can not be recycled, the application results are more elegant than the reversible suction cup stickers.
Third, the chemical elimination method
"In fact, before removing the logo on the front windshield, you can first wet the logo with a hot towel, and when it is soaked, some logo stickers can be easily torn off." Wang Meng introduced the car, "I came across For a long time, strong adhesion label, if the front windshield does not have a solar film, it can be used to remove special cleaning liquid, such as asphalt cleaner. If there is no such eliminator, it can also use soapy water or washing powder water. The soaking is also able to achieve complete elimination."
If the windshield is attached to the windshield, you can use a towel to rub some alcohol at the mark, but you can't spray it directly on the glass, or you will break the film. "Whether the front windshield is attached to the solar film, you can't use a sharpener such as a blade to eliminate the sticker. Otherwise it will scratch the glass or the solar film, and various bank cards, membership cards, and phone cards are good tools."
These three kinds of methods are the more common ways to remove the windshield logo stickers. Have you learned? If your car glass water has a bunch of unsightly logo stickers, the new logo stickers have no place to paste, you can According to the small series, it is convenient and simple. You can clean it up by yourself and let the windshield of the car shine.
Cartridge Heater,Rod Cartridge Heater,Stainless Steel Pencil Heater,Cartridge Insertion Heater,Heating Tube for Mold Machinery
Great Source Electric Heater Tech Co., Ltd. , https://www.greatsourceheater.com