The ventilation cooling of the sprinkler cannot be completely closed. This will cause the surrounding of the engine compartment to be covered with some rotten leaves and dust that are usually left on the work. Such an environment needs cleaning up is a headache. What is the way to clean it up?
First, we need to be ready to clean the work of the equipment, the engine's wire-speed care agent, spray or foam the appearance of cleaning agent; a brush head width is not a big brush, so that it can better clean the sprinkler engine compartment The various gaps; because the appearance of the sprinkler engine cleaning agent will have a certain degree of harm to the human body, so you also need to prepare a pair of gloves and masks.
After preparing the above-mentioned tools, it is necessary to find a suitable parking cleaning position. Although the cleaning of the engine compartment of the sprinkler vehicle does not require a water gun, it does not prevent some sewage from flowing to the ground after cleaning, which will also cause environmental problems. A certain amount of pollution. So just park your sprinkler in a place with a drain, such as a sewer, manhole, and drain.
Then the car's engine decorative cover was opened and the engine compartment of the sprinkler had better aesthetics. Nowadays, most models are sometimes equipped with a plastic decorative cover. Some drivers feel that the decorative cover is often wiped clean, this is also an action to protect the engine, but, how about the decorative cover is just a plastic block, you wipe the plastic cover clean, then The sludge covered below will still remain in place. If you want to clean properly and thoroughly, you still need to remove the plastic cover. The plastic decorative covers of the engine are all fixed using clips. It is sufficient to use the hand to grasp the edge of the cover and pull it up. However, there are some models of decorative cover will be connected with other management, such a situation must first remove the pipeline. Then you can see that the main body of the sprinkler engine is a dirty, long-duration sprinkler. You can see a lot of sludge on the oil filler and cylinder head cover. If you use water to wash it off, It really takes a little time.
At this time, ready-to-use sprinkler cleaners can come in handy. Use a brush or a clean cloth first to perform a simple dust removal on the engine compartment, and use the engine's exterior cleaner to clean it. If the sprinkler is not parking for a long time, then wait for the engine to cool for a while before cleaning. Shake the cleaning agent for a while and wait for the liquid to shake evenly before spraying it on the components in the engine compartment. The distance for spraying is preferably 15 CM, and it needs to be even when it is sprayed. It takes more time for the sludge to be heavy. Because part of the components in the engine compartment of the sprinkler cannot be sprayed with cleaning agent or water. For example, the ignition ring, the fuse box, etc. are best to be treated with water before cleaning.
brass Press Fittings according to vigea and connex quality,approved kitemark and DVGW,Brass Press Fittings,brass press fittings,press Brass Fittings,pipe press fittings, V type brass press fittings,M type brass press fittings,M type brass press fittings Brass M type adapter press fitting Lead Free Brass Press Fittings 1/2"-2"
Brass Press Fittings,brass press fittings,press brass fittings,pipe press fittings, V type brass press fittings,M type brass press fittings
Taizhou Runde Company , https://www.zjbrassfittings.com