How often the wiper blade is replaced has always been a big problem for the riders. In fact, all the components of the car have a life span and need to be replaced or maintained after a period of use. How long does it take for the wiper blade to take place? Replace it, here is some of the relevant knowledge about the wiper blade replacement that Xiaobian has compiled for the riders.
It was the rainy days in early summer. This year's rain seems to be particularly special. Although the wiper is resting on the windshield, it is easy to turn a blind eye during daily maintenance. When it is used, it is found to be problematic. If the wiper has a longer service life, avoid long exposure to the sun. Another point is that when there is dust on the glass, don't just open the wiper to sweep away the sand. This will damage the wiper's glue. For strips and automotive glass, you may want to spray a little cleaning solution first. Maintenance of the wiper should also pay attention to the maintenance of the car's water spray system: adding neutral, decontaminated, lubricated wiper; poor cleaning fluid will corrode the water spray system, wiper and car finish.
Wiper blade common problem
Strip streaks: no stick points attached to the wiper arm, causing the wiper stripe not to be in full contact with the glass at all parts; improper arm pressure or damage to the upper structure, or even improper wiper blades can cause Such a phenomenon.
Mist-like streaks: A layer of oil-like film is distributed on the windshield with the use of a wiper, usually due to dirt, dirt or car wax attached to the glass; the wiper strip is contaminated by car wax and oil. .
Fine water phenomenon: When the wiper is brushed over the windshield, there are still small drops of water stuck on the glass surface. This phenomenon is caused by the quality of the car wax, oil stain or silicide sticking to the windshield, rubber strip or strip.
"Kata" sound or harsh noise: When the wiper is irregularly scraped, it is mostly caused by the abrasion of the strip, the damage of the arm and the bracket, and the aging deformation of the strip. In the absence of lubrication, there is also a frictional sound when the wiper sweeps the glass.
Strip cracking: the use of strips has a certain life. After the hot and cold acid and alkali raging, hardening cracks or peeling are inevitable, and some wiper blades will fall off directly on the wiper arm. Poor quality glue will be damaged more quickly.
Strip hardening: Due to direct sunlight and direct changes in high temperature, the wiper strip hardens and loses its elasticity.
Corrosion or strip wear: Strips with poor weather, improper use of cleaning products, or substandard coatings can cause the edges of the wiper strip to be broken or completely worn.
Stripe fouling: Most of the causes are the oil stains that have accumulated on the wiper for a long time. The attached wiper of the car wax will create a gap between the windshield and the windshield.
When the above-mentioned situation of the wiper can not be solved in time, your wiper will further deteriorate and scratch the glass, which will seriously affect the safety of driving. Please pay attention to the timely replacement of the conditional wiper blade.
The above is some of the relevant knowledge about the replacement of car wiper blades for Xiaobian to arrange for the riders, I hope the riders can understand.
CNC Abrasive Sand Line Machine
Cnc Abrasive Sand Line Machine,Cnc Belt Grinder,Cnc Belt Grinding Machine,Cnc Belt Sander Grinder
Taizhou Jiangzhou CNC Machine Tool Manufacturing Co.,Ltd , https://www.tzjzmachine.com