Hot Sale Food Sterilizer/Sterilizer Autoclave/Sterilizer Machine/Steam Sterilizer

Model NO.: YS-700-SF
Capacity: Customized
Size: Customized
Control: Automatic
Material: SUS304
Trademark: Uwants
Specification: standard
Origin: Shanghai
HS Code: 8419899090
The characteristics of Hot sale food sterilizer/sterilizer autoclave/sterilizer machine/steam sterilizer

    The Hot sale food sterilizer/sterilizer autoclave/sterilizer machine/steam sterilizer use the same batch sterilization water alternately. After one pot of food processed,The high temperature treatment water will be put into the other pot, so that it can reduce the loss of the heat and processing water.It increased capacity by 2/3 comparing to the double layered sterilizing pot.
     This equipment is an extension product on the basis of the double layered hot bath sterilizing pot.Compared with the double layered hot bath sterilizing pot ,it has the following advantages:volume of production has been doubled , energy has been saved , and the cost of the equipment has been lowered.
 
Characteristic 
1. Sterilization in short time
Utilize double-tank hot water circulation for sterilization. Heated the water in the hot water tank to the required temperature of sterilization in advance, the sterilization time can be reduced and work efficiency can be improved.
2. Energy effective
The working medium during sterilization is recyclable. It reduces the production cost by saving energy, time, labor and material resources.
3. Even exchange of the water flow, even temperature, no dead area
It utilizes the international advanced technology, hot water circulation and immersion for sterilization. In the process of sterilization, circulation water in the sterilization trough will be uninterruptedly shifted up and down, left and right. It ensures the heat distribution of any spot in the trough is even. It effectively puts an end to the phenomenon of dead area in the process of sterilization and makes the guarantee period of the product more stable and longer. The temperature in the sterilization tank stays stable in all stages of the sterilization, which ensures the qualification rate of F value.
4. Automatic system
The whole sterilization process is controlled by PLC. It is a one-time action without manual operation. It utilizes the chart plate and screen touch control. All time intervals are controlled by the simulate sensor and automatic valve. The digital exhibition of pressure and temperature makes it applicable to input any pre-programmed pressure and temperature models into the computer. The computer can hold 100 sterilizing formulae.
5. Simulate temperature control system where the setting of multi-stage heating system is available.
The sterilizing method by multi-stage heating can minimize the heat on food, which can keep its original flavor, taste, nutrition and color to the utmost and make every kind of food sterilized in its best condition. The accuracy of the sterilizing temperature is up to ±0.3 so as to avoid over boiling or incomplete sterilization. 
6. Function of measuring F-value
Every retort produced by Uwants can be equipped with F-value measuring instrument. The F-value software can make the F-value calculation every 3 seconds. All sterilizing data including sterilizing conditions, F-value, time-temperature curve, time-pressure curve and so forth can be saved or printed after the processing of data processing software to serve the production management.
 
Technical parameter
 

Item
UwantsPL10-      1 UwantsPL10-    2 UwantsPL10-3 UwantsPL12-2 UwantsPL12-3 UwantsPL12-4 UwantsPL13-2 UwantsPL13-3 UwantsPL13-4
Inner  diamerter(mm)  1000  1000  1000  1200  1200  1200  1300  1300  1300
length of  canister(mm)  950  1900  2870  1900  2870  3820  1900  2870  3820

Total length
(mm)

 2780
 3740  4740 3860   4810  5850  4040  4990  5890

Total width
(mm)

 1700
 1700  1700  1900  1900  1900  2200  2200  2200
Total highness(mm)  2350  2350  2350  2550  2550  2550  2600  2600  2600

Net capacity
(m³)

 1.00
 1.78  2.52  2.58  4.82  4.82  3.05  4.29  5.70

 Weight(unload)(T)

 2.8
 3.2  3.6  3.5  4.5  4.5  4.0  4.3  4.6

 Weight(load)
(T)

 3.4
 3.8  4.3  4.2  5.8  5.8  4.8  5.6  6.2

 
 
The technical parameters of the Hot sale food sterilizer/sterilizer autoclave/sterilizer machine/steam sterilizer:
 

type
inner diameter kettle length total capacity designed pressure test pressure designed temperature
Uwants700 700mm 1400mm 0.5m ³ 0.35Mpa 0.44Mpa 145 degrees celsius

 

Range of application
 The PLC controlling automatic sterilizer  is suitable for a wide variety of packaging materials,such as:
 1.metal containers
 2.plastic & rubber containers
 3.flexible package
  
 
FAQ
1. How to heat up the autoclave?
Equipped with high pressure boiler, to provide high pressure and temperature steam.
Via electric heating pipe, need stable electricity.
2.How to decide the size of autoclave we need?
Please show us the packing details of your product and the production per day. We will show you suitable type.
3.What is the control type of the autoclave?
You can choose from semi-automatic type or automatic type.
 

Valve Caps

JIAX Company have different valve caps, as below.

China leading manufacturers and suppliers of Valve Caps,Aircraft Shaped Valve Cap, and we are specialize in Motorcycle Bike Tire Valve Cap,Bicycle Tire Valve Cap, etc.

Our company provides:OEM/ODM CNC machining turning milling service according to your drawing or samples.

Wholesale different car accessories,such as sensor spacer parts,car automotive oil filter and AN NPT treaded adapter,auto parts,Oxygen Sensor Spacer, o2 sensor tool,Car Antenna,valve caps,jdm car accessories ,we also oem odm different hardware and plastic parts with your drawing or samples.

Here have 20workers,1000m2 workshop.10sets cnc machines,12sets cnc lathes,5sets auto lathes.10 years experience.

Valve Caps,Aircraft Shaped Valve Cap,Motorcycle Bike Tire Valve Cap,Bicycle Tire Valve Cap,End Tire Valve Stem

Dongguan Jiaxing Precision Machinery Co., Ltd. , https://www.jiaxingmachinery.com

Posted on