High Quality Conveyor Roller Bearing Housing

TK6205-108 Bearing Housing Description

1. Bearing: 6205

2. Bearing seat diameter: 52mm

3. Pipe OD: 108mm

4. Outside flange diameter: 103mm

5. Bore diameter: 40mm

6. Deepness: 45mm

7. Shaft: 25mm

8. Thickness: 2.5mm

 

Product Features:

 

Roller Model: TK, TKII, DTII, TD75

 

Bearing Type: 6203,6204,6205,6206,6305,6306,6307,6308,

6309, 6310.etc.

 

Roller Diameter:63,76,89,103,108,114,127,133,159,165,176,

194, 219,etc.

 

Material:

 1. Bearing Housing: Carbon steel 

 

 2. Inner Sealing Ring: Nylon PA6

 

 3. Male/Female Labyrinth Seal: POM

 

 4. Cover Cap: Carbon Steel SPCC

 

 5. Protective Shield: Nylon PA6

the detail as customer's drawing

TK6205-108 Bearing Housing Description

1. Bearing: 6205

2. Bearing seat diameter: 52mm

3. Pipe OD: 108mm

4. Outside flange diameter: 103mm

5. Bore diameter: 40mm

6. Deepness: 45mm

7. Shaft: 25mm

8. Thickness: 2.5mm

 

Product Features:

 

Roller Model: TK, TKII, DTII, TD75

 

Bearing Type: 6203,6204,6205,6206,6305,6306,6307,6308,

6309, 6310.etc.

 

Roller Diameter:63,76,89,103,108,114,127,133,159,165,176,

194, 219,etc.

 

Material:

 1. Bearing Housing: Carbon steel 

 

 2. Inner Sealing Ring: Nylon PA6

 

 3. Male/Female Labyrinth Seal: POM

 

 4. Cover Cap: Carbon Steel SPCC

 

 5. Protective Shield: Nylon PA6

the detail as customer's drawing

Matt Vinyl Wrap

Matte vinyl wrap is a type of vinyl material that has a non-glossy, flat finish. It is commonly used to wrap vehicles, such as cars, motorcycles, and boats, to change their appearance and protect the original paintwork. Matte vinyl wrap gives a sleek, modern look to the vehicle and can be customized with various colors and designs. It is a popular alternative to traditional glossy vinyl wraps and offers a unique aesthetic appeal.

Installing matte vinyl wrap can be a bit tricky, but with the right tools and techniques, you can achieve a professional-looking finish. Here's a step-by-step guide on how to install matte vinyl wrap:

1. Gather your materials: You will need matte vinyl wrap, a squeegee, a heat gun or hairdryer, a sharp utility knife, rubbing alcohol or a vinyl wrap cleaner, and a microfiber cloth.

2. Prepare the surface: Clean the surface thoroughly with rubbing alcohol or a vinyl wrap cleaner to remove any dirt, grease, or wax. Use a microfiber cloth to ensure a clean and dry surface.

3. Measure and cut the vinyl wrap: Measure the area you want to wrap and cut the vinyl wrap slightly larger than the area to allow for trimming. Use a sharp utility knife and a straight edge to make clean and precise cuts.

4. Peel off the backing: Carefully peel off a small portion of the backing from the vinyl wrap, exposing the adhesive side. Be careful not to touch the adhesive with your fingers to prevent any oils or dirt from transferring onto the wrap.

5. Apply the vinyl wrap: Align the exposed adhesive side of the vinyl wrap with the edge of the surface you are wrapping. Slowly press down the vinyl wrap onto the surface, using a squeegee to smooth out any air bubbles or wrinkles. Work from one edge to the other, applying even pressure.

6. Use heat to stretch and conform the wrap: Use a heat gun or hairdryer to warm up the vinyl wrap as you go. This will make the wrap more pliable and easier to stretch and conform to the contours of the surface. Be careful not to overheat the vinyl, as it can cause damage.

7. Trim the excess vinyl: Once the vinyl wrap is applied, use a sharp utility knife to trim off the excess vinyl. Be careful not to cut into the surface underneath. Use the squeegee to press down and smooth out the edges.

8. Heat and reapply if necessary: If you encounter any air bubbles or wrinkles, use the heat gun or hairdryer to warm up the vinyl wrap and reapply it, smoothing out any imperfections.

9. Final touches: Once the vinyl wrap is applied and trimmed, use the heat gun or hairdryer to heat up the edges and corners, and use the squeegee to press them down firmly for a secure and clean finish.

10. Allow time to cure: Give the vinyl wrap some time to cure and adhere properly. Avoid washing or exposing the wrap to extreme temperatures for at least 24-48 hours.

Remember, practice makes perfect, so don't be discouraged if your first attempt is not perfect. Take your time, be patient, and follow these steps carefully to achieve a professional-looking matte vinyl wrap installation.

Satin Vinyl Wrap,Satin Car Wrap,Matte Wrap,Ultimate Flat,ceramic car vinyl

Guangzhou Fuyulai Technology Co.,Ltd , https://www.fuyulaifilm.com