Temperature range:-35C to 5C
HTSL series low temperature screw chiller is widely adopted in manufacturing process in industries such as non-ferrous smelting, chemical and pharmaceutical, petroleum chemistry, grain and oil, food and beverage, mechanical, electric, air separation, etc.
Unit main parts include Semi-hermetic screw compressor, oil separator, condenser, economizer, evaporator and control system.
Design features:
Coolant temperature range -35C to 5C
High efficient semi-hermetic twin-screw compressor adopted, high COP, steady performance and long service life.
Compressor stepped capacity control, minimize starting current and impact to grid.
25%-100% continuous capacity control, ensuring compressor full performance, saving running cost for customers.
High accuracy touch screen and imported PLC controller adopted.
Multi-protection function: Compressor discharge over temperature, motor over temperature, anti-freezing, over current, phase sequence, high/low pressure, flow switch.
Mass Storage PLC, allows permanent reservation of more than 100 fault records, precisely monitors unit running state.
Pass word setting, avoids unit from shut down or damaged by accidental factor.
Control components including thermal expansion valve, solenoid valve, check valve are supplied by international brand, ensuring steady and efficient running under wide range of working condition.
Units are completely tested and operated at full load, leave factory with refrigerant, can be start once water and power is connected.
Compressor with built-in exhaust pot silencer ensures low noise running.
Corrosion-resistance water system upon request.
Refrigerant option: R22, R407C, R404A, R134A and R410A.
Â
| model[HTSL-***] | 80AD | 100AD | 120AD | 140AD | 160AD | 180AD | 200AD | 240AD | 280AD | |||
| nominal cooling capacity |  -10ºC | kw | 128 | 170 | 184 | 224 | 246 | 292 | 336 | 402 | 478 | |
|  -20ºC | 86 | 112 | 122 | 150 | 164 | 194 | 224 | 266 | 318 | |||
|  -30ºC | 64 | 84 | 90 | 112 | 122 | 144 | 166 | 200 | 236 | |||
| max power consumption | kw | 87.2 | 106.4 | 120 | 142 | 158 | 178.4 | 203 | 249 | 285 | ||
| power source | Â | 3PH-380V~415V/ 50HZÂ Â | ||||||||||
| refrigerant | type | Â | R22/R404A | |||||||||
| charge | kg | 62 | 78 | 94 | 108 | 124 | 140 | 154 | 186 | 218 | ||
| control | Â | thermostatic expansion valve | ||||||||||
| compressor | type |  | semi-hermetic screw |  | ||||||||
| motor power | kw | 40×2 | 50×2 | 55×2 | 67×2 | 73×2 | 82×2 | 95×2 | 115×2 | 133×2 | ||
| start mode |  | Y-Δ | ||||||||||
| capacity control | % | 0-25-50-75-100 | ||||||||||
| evaporator | type | Â | shell and tube (ss plate heat exchanger) | |||||||||
| coolant volume |  -10ºC | m 3 /h | 22 | 29.2 | 31.6 | 38.5 | 42.3 | 50.2 | 57.8 | 69.1 | 82.2 | |
|  -20ºC | 14.8 | 19.3 | 21 | 25.8 | 28.2 | 33.4 | 38.5 | 45.7 | 54.7 | |||
|  -30ºC | 11 | 14.4 | 15.5 | 19.3 | 21 | 24.8 | 28.5 | 34.4 | 40.6 | |||
| water pressure drop | kPa | 45 | 43 | 43 | 41 | 42 | 45 | 42 | 46 | 48 | ||
| pipe connection | inch | 4 | 4 | 5 | 5 | 5 | 6 | 6 | 8 | 8 | ||
| condenser | type | Â | air cooled type high efficiency finned cooper tube | |||||||||
| fan information | type | Â | big volume & low noice axil fan | |||||||||
| motor power | kw | 1.2× 6 | 0.8×8 | 1.2× 8 | 0.8×10 | 1.2× 10 | 1.2× 12 | 0.8×16 | 1.2× 16 | 1.2× 16 | ||
| air volume | m 3 /h | 60000 | 75000 | 90000 | 105000 | 120000 | 135000 | 150000 | 180000 | 210000 | ||
| safety devices |  |  inner thermostat for compressor motor, unit overload relay, high and low pressure switch, freeze protection thermostat,reverse phase protection relay, discharge gas thermostat, flow switch, | ||||||||||
| dimension | length | mm | 3200 | 4000 | 4800 | 5500 | 6200 | 6800 | 7800 | 8500 | 10500 | |
| depth | mm | 1950 | 1950 | 1950 | 1950 | 2000 | 2000 | 2200 | 2200 | 2200 | ||
| height | mm | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2350 | 2350 | 2350 | ||
| net weight | kg | 2600 | 3050 | 3450 | 3800 | 4200 | 4450 | 4850 | 5300 | 5550 | ||
| running weight | kg | 2900 | 3350 | 3750 | 4200 | 4600 | 4950 | 5350 | 5900 | 6150 | ||
| The above specifications is according to the following design conditions: 1. Condensing temperature 50ºC. 2. Cooling air inlet/outlet temperature 30ºC/38ºC. We reserve the right to modify the specifications without further notice. |
 | |||||||||||
Tomato Paste Filling Production Line
Jump Machinery (Shanghai) Limited is a modern high-tech joint stock enterprise specialized in the turnkey production line of concentrated juice, jam, pulp, tropical fruits, herb and tea beverages, carbonated drinks, wine, beer, yogurt, cheese, milk, butter etc. At the same time, Jump is also committed to manufacturing various food machinery, such as Can Food Machinery , Fruits Juice Machinery, Tomato Sauce Machinery, Fruits Jam Machinery, Dairy Machinery etc.
Jump is able to supply service from A to Z about your project, not only machine manufacturing, installation commissioning, technical training, after-sales service, but also before-sales service, including factory building construction drawings, facilities layout, and water, electricity, boiler steam. Jump has a professional team to help clients to design the layout on worksite and draft the implementation plan, program schedule and expense estimation in each stage of the project until the production line starts the project.
As an industry leader, it has the best projects, professional engineers and technicians, strong R&D department with a number of masters and PhD of food engineering & packaging machinery, stable long-term development and highly rated customer experience in every province in China and also in Africa, the Middle East, Southeast Asia, Oceania, Europe and America.
Tomato Paste Filling Production Line,Tomato Drying Equipment,Tomato Processing Equipment,Ketchup Sachet Filling Machine
Jump Machinery (Shanghai) Limited , https://www.shanghaimachineries.com