Model NO.: LG-100/130/200/400
Trademark: CHD
Specification: 800*360*880
Origin: Shanghai
HS Code: 8456901000
Model NO.: LG-100/130/200/400
Trademark: CHD
Specification: 800*360*880
Origin: Shanghai
HS Code: 8456901000
Product SummaryThe CHD 200i air Plasma Cutter is an economical plasma cutting system for non-ferrous metal such as stainless steel,aluminum,copper,brass,stainless steel,aluminum,copper,brass.which has adopted IGBT technology, This portable unit features a lightweight, powerful inverter design and an ergonomic trigger safety, with more efficient air consumption and economically priced consumables. And you'll never have gas pressure settings, flame tuning, metal preheating, or gas cylinders or refills to worry about.it  can be fitted with handheld torch or CNC automatic cutter.its cutting speed has been greatly increased.and much more ecnomical and time-saving  than gas/frame cutter.longer life and less comsumables replacement. it will be a great help if you try it.
Manual plasma cutter
Work with portable CNC cutter
Features
1.High power density, excellent arc stability, strong cutting force
2.High cutting efficiency (Three to five times than flame cutting)
3.Stepless adjusting of cutting current,Convenient for operation
4.High quality cutting finish with narrow ,clean and neat, nearly vertical cutting edge. Small slope, little slag.
Heat of Workpiece affect smaller scope
5.Also adopt  LF arc start, won't interfere CNC cutting machine & moving system, Ensure people and facility-system safety, and Easier arc start
6.Possess auto-lock & non-self-lock two functions, suitable for the requirement of auto-cutting and manual cutting, can reducing labor intensity.
7.Small, light and portable, HIGH POWER FACTOR, High Efficient and energy saving.
Technical Parameter
 | LG-60 | LG-100 | LG-130 | LG-200 |
rated input voltage | 3phase 380VAC Â 50HZ | |||
rated input capacity | 6.8KVA | 14.5KVA | 20KVA | 35KVA |
rated output current | 60A | 100A | 130A |
130A 160 |
rated output voltage | 104V | 120V | 132V | 160V |
Rated Duty Cycle | 60% | 60% | 60% | 60% |
current adjust range | 30~60A | 30~100A | 30~130A | 30~200A |
optimum cutting thickness of steel | 0.3~12mm | 0.3~22mm | 0.3~30mm | 1~45MM |
MAX cutting thickness of steel | 20mm | 40mm | 45mm | 65MM |
use plasma gaseous | Compressed air | Compressed air | Compressed air | Compressed air |
Pressure range of Working plasma gaseous |
0.3~0.4MPa | 0.4~0.5MPa | 0.4~0.6MPa | 0.4~0.6MPa |
 torch cooling type | Air-cool | Air-cool | Water-cool | Water-cool |
arc start type | non-touch arc start | |||
Out dimension(mm)(longitude*width*height) | 510*280*610 | 600*325*740 | 710*380*790 | 800*360*880 |
weight | 46Kg | 51Kg | 58Kg | 75Kg |
Advantage
1 | Available With CNC cutting system to fit the application |
2 | Small volume,light weight,energy saving,60%(100%)high duty cycle |
3 | The cutting current can be preset accurately |
4 | Fast high frequency arc starting enable the reduction of interference to CNC system |
5 | With stable plasma arc and high speed enable smooth incision and little deformation |
6 | Gas cut-off delay function effectively protects the torch |
What's Included
(1)200i Plasma cutter
(1) 6 m hand-held torchÂ
(1) 3m work cable with clamp
(1) .power cord with plug
Extra Consumables (10 electrode, 10 tips,10 sheild cover)
Packing picture
Cut with Quality and Confidence
FAQ
1. Q: Are you manufaturer or trading company?
A: We are a factory with 28 years manufacturing experience.our main products is IGBT inverter air plasma cutter,CNC cutting machine,welding machine,beveling machine.
2. Q: what certificate do you get?
A: CE ,ISO,CCC and SGS.
3. Q: do you accept OEM orders?
   A:yes,we can accept OEM orders.
4Â Â Q:How many days for mass production?
   A:15 working days after receipt of remittance.
5Â Â Q:what is your garantee period?
   A:1 year
6Â Â Q:where is your factory located?how can i visit?
A:Our factory is located in Jiading District Shanghai City China. If you would like to visit our factory, we are glad to pick you up at the airport or train station.
7. Q:cutting material?cutting thickess?
A:All kind of sheet metal,aluminum,copper,brass.max cutting thickess is 65mm,but optional thickness is 45mm.
8Â Â Q:what after-sale service do you offer?
A: 24 Hours Online Service, Free spare parts for breakdown machine in warranty service
9.Q:cutting speed?
   A:10m/minute
10.Q: working voltage?
   A:3 phase 380v
About CHD
Founded in 1989,with 28 years experience in cutting machine and welding machine market,with ISO9001 certified enterprise ,CCC certified enterprise ,CE certified enterprise.
Drafter of the national standard of the arc welding machines.3 manufacture bases and plant area of more than 53000 square meters,Participated in 3 drafts of China Natinal Standard and own 9 invention patents.our products have been sold to more than 70 countries,the sales quantity of cutting machines are more than 10000 every year.
Exhibition
CHD have participated in all kinds of the welding exhibitions more than 100 times since 1989 when enterprise started to run over the last decade.we attend at least 6 exhibitions annually.Â
1989-2015 all the Beijing Essen Welding&Cutting Exhibitions
1989-2015 all the China welding expositions.
and exhibitions in Russia,Austrilia,India,Brazil,Vietnam&all over the mainland China.
 Product Summary
The CHD 200i air Plasma Cutter is an economical plasma cutting system for non-ferrous metal such as stainless steel,aluminum,copper,brass,stainless steel,aluminum,copper,brass.which has adopted IGBT technology, This portable unit features a lightweight, powerful inverter design and an ergonomic trigger safety, with more efficient air consumption and economically priced consumables. And you'll never have gas pressure settings, flame tuning, metal preheating, or gas cylinders or refills to worry about.it  can be fitted with handheld torch or CNC automatic cutter.its cutting speed has been greatly increased.and much more ecnomical and time-saving  than gas/frame cutter.longer life and less comsumables replacement. it will be a great help if you try it.
Manual plasma cutter
Work with portable CNC cutter
Features
1.High power density, excellent arc stability, strong cutting force
2.High cutting efficiency (Three to five times than flame cutting)
3.Stepless adjusting of cutting current,Convenient for operation
4.High quality cutting finish with narrow ,clean and neat, nearly vertical cutting edge. Small slope, little slag.
Heat of Workpiece affect smaller scope
5.Also adopt  LF arc start, won't interfere CNC cutting machine & moving system, Ensure people and facility-system safety, and Easier arc start
6.Possess auto-lock & non-self-lock two functions, suitable for the requirement of auto-cutting and manual cutting, can reducing labor intensity.
7.Small, light and portable, HIGH POWER FACTOR, High Efficient and energy saving.
Technical Parameter
 | LG-60 | LG-100 | LG-130 | LG-200 |
rated input voltage | 3phase 380VAC Â 50HZ | |||
rated input capacity | 6.8KVA | 14.5KVA | 20KVA | 35KVA |
rated output current | 60A | 100A | 130A |
130A 160 |
rated output voltage | 104V | 120V | 132V | 160V |
Rated Duty Cycle | 60% | 60% | 60% | 60% |
current adjust range | 30~60A | 30~100A | 30~130A | 30~200A |
optimum cutting thickness of steel | 0.3~12mm | 0.3~22mm | 0.3~30mm | 1~45MM |
MAX cutting thickness of steel | 20mm | 40mm | 45mm | 65MM |
use plasma gaseous | Compressed air | Compressed air | Compressed air | Compressed air |
Pressure range of Working plasma gaseous |
0.3~0.4MPa | 0.4~0.5MPa | 0.4~0.6MPa | 0.4~0.6MPa |
 torch cooling type | Air-cool | Air-cool | Water-cool | Water-cool |
arc start type | non-touch arc start | |||
Out dimension(mm)(longitude*width*height) | 510*280*610 | 600*325*740 | 710*380*790 | 800*360*880 |
weight | 46Kg | 51Kg | 58Kg | 75Kg |
Advantage
1 | Available With CNC cutting system to fit the application |
2 | Small volume,light weight,energy saving,60%(100%)high duty cycle |
3 | The cutting current can be preset accurately |
4 | Fast high frequency arc starting enable the reduction of interference to CNC system |
5 | With stable plasma arc and high speed enable smooth incision and little deformation |
6 | Gas cut-off delay function effectively protects the torch |
What's Included
(1)200i Plasma cutter
(1) 6 m hand-held torchÂ
(1) 3m work cable with clamp
(1) .power cord with plug
Extra Consumables (10 electrode, 10 tips,10 sheild cover)
Packing picture
Cut with Quality and Confidence
FAQ
1. Q: Are you manufaturer or trading company?
A: We are a factory with 28 years manufacturing experience.our main products is IGBT inverter air plasma cutter,CNC cutting machine,welding machine,beveling machine.
2. Q: what certificate do you get?
A: CE ,ISO,CCC and SGS.
3. Q: do you accept OEM orders?
   A:yes,we can accept OEM orders.
4Â Â Q:How many days for mass production?
   A:15 working days after receipt of remittance.
5Â Â Q:what is your garantee period?
   A:1 year
6Â Â Q:where is your factory located?how can i visit?
A:Our factory is located in Jiading District Shanghai City China. If you would like to visit our factory, we are glad to pick you up at the airport or train station.
7. Q:cutting material?cutting thickess?
A:All kind of sheet metal,aluminum,copper,brass.max cutting thickess is 65mm,but optional thickness is 45mm.
8Â Â Q:what after-sale service do you offer?
A: 24 Hours Online Service, Free spare parts for breakdown machine in warranty service
9.Q:cutting speed?
   A:10m/minute
10.Q: working voltage?
   A:3 phase 380v
About CHD
Founded in 1989,with 28 years experience in cutting machine and welding machine market,with ISO9001 certified enterprise ,CCC certified enterprise ,CE certified enterprise.
Drafter of the national standard of the arc welding machines.3 manufacture bases and plant area of more than 53000 square meters,Participated in 3 drafts of China Natinal Standard and own 9 invention patents.our products have been sold to more than 70 countries,the sales quantity of cutting machines are more than 10000 every year.
Exhibition
CHD have participated in all kinds of the welding exhibitions more than 100 times since 1989 when enterprise started to run over the last decade.we attend at least 6 exhibitions annually.Â
1989-2015 all the Beijing Essen Welding&Cutting Exhibitions
1989-2015 all the China welding expositions.
and exhibitions in Russia,Austrilia,India,Brazil,Vietnam&all over the mainland China.
Â
Chiming 12 Inch Led Light Bar driving beam white position light , voltage 10-30V with ECE R112 Certification
light bars for boats,jeep lighting,rgb light bars,light bar amber
Guangzhou ChiMing Electronic Technology Co.,Ltd , https://www.chiminglighting.com