The first is the power upgrade. Equipped with the new dCi450 engine, it has better power and lower fuel consumption. The power is increased to 450 hp and the torque is increased to 2100 Nm. The dCi 450 engine has been upgraded with engine thermal control management, which effectively reduces the friction work and accessory work during engine operation, enabling users to reduce fuel consumption by 1.5%. Typical mountain areas can reduce fuel consumption by 2-3%. In addition, new materials have been applied to components such as cylinder heads, spindle connecting rods, air compressors, and oil filter cartridges, which not only significantly increases engine reliability, but also enables fuel consumption to decrease by approximately 0.5%.
The second is lightweight upgrades. Through the chassis structure optimization and high-strength, lightweight material applications and other measures to achieve efficient carrying, safe weight reduction. Through 17 light weight technologies such as gearboxes, bridges and leaf springs, the entire vehicle will lose 400 kilograms.
The third is the maintenance warranty upgrade - long oil mileage, maintenance time and worry; to replace the repair, quality commitment. Efficient maintenance program. The engine, transmission oil change mileage reaches a true 100,000 kilometers. Consistent maintenance of the entire vehicle of 50,000 kilometers, including the maintenance of key parts such as engine, transmission, axle, steering gear, etc., customers can effectively carry out planned parking maintenance, greatly reduce the number of station maintenance, 400,000 kilometers all maintenance just stop 9 times. Intimate warranty program. 2 years 200,000 kilometers to replace the repair (engine, gearbox to meet the specific cylinder failure need to open the cover maintenance); 3 years unlimited mileage warranty (engine, transmission core pieces).
Fourth, the chassis technology upgrade - through the chassis component structure optimization and new technology applications, the overall performance of the vehicle has increased significantly. In addition, the North Edition models were added to the working conditions in the cold regions, and the special conditions for the cold regions were increased to include Eberh parking heaters, dual-chamber fuel tanks, and fuel heating. (This article comes from Dongfeng)
The main features of molybdenum rods include high melting point, good thermal conductivity, low thermal expansion performance, good high temperature oxidation resistance, and high temperature strength.
Molybdenum can increase steel`s corrosion resistance in the acid-based solutions and liquid metals, thus improve its wear resistance, hardenability, weldability, and heat resistance. As an element which easy to form carbides, molybdenum can effectively avoid oxidation during steel making process, and it can be used alone or mix with other alloy element to achieve the best performance.
High temperature smelting additives
Luoyang Golden Egret Geotools Co., Ltd , https://www.xtclasercladding.com