Model NO.: GFX112
Pressure: Low Pressure
Condition: New
Inner Diameter: 112
Valid Height: 730mm
Max Speed: 16300-16500rpm
Centrifugal Force: 18000g
Valid Volume: 7L
Motor Power: 3.0kw
Water Capacity: 2000L/Hr
Weight: 490kg
Dimension: 500*600*1650mm
Trademark: Hongji
Transport Package: Wooden Case
Specification: GFX105
Origin: Liaoyang City
Model NO.: GFX112
Pressure: Low Pressure
Condition: New
Inner Diameter: 112
Valid Height: 730mm
Max Speed: 16300-16500rpm
Centrifugal Force: 18000g
Valid Volume: 7L
Motor Power: 3.0kw
Water Capacity: 2000L/Hr
Weight: 490kg
Dimension: 500*600*1650mm
Trademark: Hongji
Transport Package: Wooden Case
Specification: GFX105
Origin: Liaoyang City
Product Description :
Main Purposes:
The blood separator is one kind of tubular separator. This machine is the improved one on the base of the original separator and through experiment again and again. This kind of machine can be extensively used in separating blood plasma and cell of pig, cow, sheep and chicken etc.
Main Features:
The main feature of it is the high yield and the rate of broken blood cell can be reduced to the lowest extent. The contact part between the separator and material is made of stainless steel which can meet the requirement of GMP in medicine making industry.
Main Purposes:
The blood separator is one kind of tubular separator. This machine is the improved one on the base of the original separator and through experiment again and again. This kind of machine can be extensively used in separating blood plasma and cell of pig, cow, sheep and chicken etc.
Structure and principle:
It is high speed separator. It has better separation. The separator is consisted of main body, driving device, bowl collecting pan and liquid-in bearing seats. The upper of the bowl is flexible main shaft and the lower of it is damp floating. The main shaft is connected with a driven wheel by the coupling seat with the buffer. The power is transmitted to the driven wheel by the motor through the transmission belt and the tensioner to make the bowl rotate around its axis at an over speed and form a strong centrifugal force field. The product sprays into the liquid inlet from the bottom and liquid is forced to flow upward along the inner wall of the bowl and then is separated into different layers according to different density.
GFX model is a separating equipment where there the liquid phase of large density is formed into outer ring and the liquid phase of small density is shaped into inner ring, to flow to the top of bowl, to be discharged out from their respective liquid outlets. The micro solids settle on the wall of the bowl and are to be manually dumped after the machine is shut down.
GFX: It is used for separating various emulsion, especially adaptable for liquid-liquid separation with slight gravity difference and liquid-liquid-solid separation with a little foreign matter, such as separation of various oil and micro powder, extract liquid from plants, separation of plasma and cell.
Technology Parameters :Â
The blood separator is one kind of tubular separator. This machine is the improved one on the base of the original separator and through experiment again and again. This kind of machine can be extensively used in separating blood plasma and cell of pig, cow, sheep and chicken etc.
Main Features:
The main feature of it is the high yield and the rate of broken blood cell can be reduced to the lowest extent. The contact part between the separator and material is made of stainless steel which can meet the requirement of GMP in medicine making industry.
Main Purposes:
The blood separator is one kind of tubular separator. This machine is the improved one on the base of the original separator and through experiment again and again. This kind of machine can be extensively used in separating blood plasma and cell of pig, cow, sheep and chicken etc.
Structure and principle:
It is high speed separator. It has better separation. The separator is consisted of main body, driving device, bowl collecting pan and liquid-in bearing seats. The upper of the bowl is flexible main shaft and the lower of it is damp floating. The main shaft is connected with a driven wheel by the coupling seat with the buffer. The power is transmitted to the driven wheel by the motor through the transmission belt and the tensioner to make the bowl rotate around its axis at an over speed and form a strong centrifugal force field. The product sprays into the liquid inlet from the bottom and liquid is forced to flow upward along the inner wall of the bowl and then is separated into different layers according to different density.
GFX model is a separating equipment where there the liquid phase of large density is formed into outer ring and the liquid phase of small density is shaped into inner ring, to flow to the top of bowl, to be discharged out from their respective liquid outlets. The micro solids settle on the wall of the bowl and are to be manually dumped after the machine is shut down.
GFX: It is used for separating various emulsion, especially adaptable for liquid-liquid separation with slight gravity difference and liquid-liquid-solid separation with a little foreign matter, such as separation of various oil and micro powder, extract liquid from plants, separation of plasma and cell.
Technology Parameters :Â
|  Item | GFX105 | GFX112 | GFX125 | ||
|    Drum |
ID(mm) | 105 | 112 | 125 | |
| Height (mm) | 730 | 730 | 730 | ||
| Sedimentation volume(L) | 6 | 7 | 8 | ||
| Max speed(r/min) | 19000 | 17500 | 16500 | ||
| Max separation factor | 21000 | 18500 | 17500 | ||
| Inlet nozzle diameter (mm) | 4/6/8 | 6/8/10 | 6/8/10 | ||
| Material inlet pressure (Mpa) | 0.05 | ||||
| Capacity of refrigerated blood(L/H) | 400 | 650 | 680 | ||
| Capacity of fresh blood(L/H) | 450 | 710 | 730 | ||
| Motor model | 3 phase two pole motor | ||||
| Motor power (kw) | 2.2 | 3 | 3 | ||
| Machine dimension (mm) | 600*1000*1600 | 600*1000*1600 | 600*1000*1600 | ||
| Machine weight (kg) | 490 | 500 | 510 | ||
Showing the separation effect :
Product Description :
Main Purposes:
The blood separator is one kind of tubular separator. This machine is the improved one on the base of the original separator and through experiment again and again. This kind of machine can be extensively used in separating blood plasma and cell of pig, cow, sheep and chicken etc.
Main Features:
The main feature of it is the high yield and the rate of broken blood cell can be reduced to the lowest extent. The contact part between the separator and material is made of stainless steel which can meet the requirement of GMP in medicine making industry.
Main Purposes:
The blood separator is one kind of tubular separator. This machine is the improved one on the base of the original separator and through experiment again and again. This kind of machine can be extensively used in separating blood plasma and cell of pig, cow, sheep and chicken etc.
Structure and principle:
It is high speed separator. It has better separation. The separator is consisted of main body, driving device, bowl collecting pan and liquid-in bearing seats. The upper of the bowl is flexible main shaft and the lower of it is damp floating. The main shaft is connected with a driven wheel by the coupling seat with the buffer. The power is transmitted to the driven wheel by the motor through the transmission belt and the tensioner to make the bowl rotate around its axis at an over speed and form a strong centrifugal force field. The product sprays into the liquid inlet from the bottom and liquid is forced to flow upward along the inner wall of the bowl and then is separated into different layers according to different density.
GFX model is a separating equipment where there the liquid phase of large density is formed into outer ring and the liquid phase of small density is shaped into inner ring, to flow to the top of bowl, to be discharged out from their respective liquid outlets. The micro solids settle on the wall of the bowl and are to be manually dumped after the machine is shut down.
GFX: It is used for separating various emulsion, especially adaptable for liquid-liquid separation with slight gravity difference and liquid-liquid-solid separation with a little foreign matter, such as separation of various oil and micro powder, extract liquid from plants, separation of plasma and cell.
Technology Parameters :Â
The blood separator is one kind of tubular separator. This machine is the improved one on the base of the original separator and through experiment again and again. This kind of machine can be extensively used in separating blood plasma and cell of pig, cow, sheep and chicken etc.
Main Features:
The main feature of it is the high yield and the rate of broken blood cell can be reduced to the lowest extent. The contact part between the separator and material is made of stainless steel which can meet the requirement of GMP in medicine making industry.
Main Purposes:
The blood separator is one kind of tubular separator. This machine is the improved one on the base of the original separator and through experiment again and again. This kind of machine can be extensively used in separating blood plasma and cell of pig, cow, sheep and chicken etc.
Structure and principle:
It is high speed separator. It has better separation. The separator is consisted of main body, driving device, bowl collecting pan and liquid-in bearing seats. The upper of the bowl is flexible main shaft and the lower of it is damp floating. The main shaft is connected with a driven wheel by the coupling seat with the buffer. The power is transmitted to the driven wheel by the motor through the transmission belt and the tensioner to make the bowl rotate around its axis at an over speed and form a strong centrifugal force field. The product sprays into the liquid inlet from the bottom and liquid is forced to flow upward along the inner wall of the bowl and then is separated into different layers according to different density.
GFX model is a separating equipment where there the liquid phase of large density is formed into outer ring and the liquid phase of small density is shaped into inner ring, to flow to the top of bowl, to be discharged out from their respective liquid outlets. The micro solids settle on the wall of the bowl and are to be manually dumped after the machine is shut down.
GFX: It is used for separating various emulsion, especially adaptable for liquid-liquid separation with slight gravity difference and liquid-liquid-solid separation with a little foreign matter, such as separation of various oil and micro powder, extract liquid from plants, separation of plasma and cell.
Technology Parameters :Â
|  Item | GFX105 | GFX112 | GFX125 | ||
|    Drum |
ID(mm) | 105 | 112 | 125 | |
| Height (mm) | 730 | 730 | 730 | ||
| Sedimentation volume(L) | 6 | 7 | 8 | ||
| Max speed(r/min) | 19000 | 17500 | 16500 | ||
| Max separation factor | 21000 | 18500 | 17500 | ||
| Inlet nozzle diameter (mm) | 4/6/8 | 6/8/10 | 6/8/10 | ||
| Material inlet pressure (Mpa) | 0.05 | ||||
| Capacity of refrigerated blood(L/H) | 400 | 650 | 680 | ||
| Capacity of fresh blood(L/H) | 450 | 710 | 730 | ||
| Motor model | 3 phase two pole motor | ||||
| Motor power (kw) | 2.2 | 3 | 3 | ||
| Machine dimension (mm) | 600*1000*1600 | 600*1000*1600 | 600*1000*1600 | ||
| Machine weight (kg) | 490 | 500 | 510 | ||
Showing the separation effect :
Outdoor Cooler ,Outdoor Beverage Cooler,Outdoor Beer Fridge,Wine And Beverage Cooler
Foshan Sunnai Electrical Appliance Co., Ltd , https://www.sunnaiwinecooler.com