Four Strand PVC 32 Pipe Extrusion Line

Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
Four strand PVC 32 Pipe Extrusion Line 
This four strand PVC 32 pipe extrusion line can produce the pipe size 32mm. this four strand PVC32 Pipe Extrusion Line is with big capacity, it is 4 production lines, can produce 4 pipes at same time. So the capacity is high. The pipe size is: 16-32mm diameter.
please check below machine pictures for your reference:
Four Strand PVC 32 Pipe Extrusion Line

Material :                           PVC (polyvinyl chloride)
Pipe size range:                     Ø16~32mm
Operating direction:                 from right to left
Center height:                       1000 mm
Machine color:                      Xinrong standard color (white)
Cooling water consumption:           8 m3/h  ( ≤20ºC,≥0.3MPa )    
Tank volume:                     12 m3 
Compressed air consumption:      0.5 m3/min ( >0.5MPa )
Total power:                         165kW
Actual power when operating:        100kW
Overall dimension:                   31000×3000×3000 mm
Control system:                   RKC temperature controller, Japan 
DC speed regulator:                Eurotherm, U.K 
Inverter:                     ABB or BOSCH-REXROTH
Low voltage electrical parts     
Button, switch                 Schneider, France 
Contactor                    Schneider, France
Air switch                     Schneider, France 
Intermediate relay             Schneider, France
Temperature controller          RKC, Japan
Heater                        magal alloy ceramic heater
l    Circumstance: 
Working place:               indoors
Power supply:                no dangerous area
Temperature:                 0-40ºC
Humidity:                    85% no condensation

Four Strand PVC 32 Pipe Extrusion Line


Vaulted cover, no distortion. National patent for principal axis airproof device. 
Self-friction or electric heating and steam heating function of the hot mixing.
•    Total capacity:                     200/500 L
•    Effective capacity:                  150/320 L
•    Vane rotation speed:                475/950/130 rpm
•    Motor heating power:                30/42/11 KW
•    Water consumption:                 4 t/h
•    Heating method:                    self-friction or electric heating
•    Discharge method:                  pneumatic or manual
•    Dimension (L×W×H):                3000×1500×2000 mm
•    Mixing time:                        10-12 min/pot
•    Cooling time:                       10-12 min/pot

Four Strand PVC 32 Pipe Extrusion Line

•    Screw, barrel:                    38CrMoAlA, nitriding and polishing,                                             depth of nitriding: 0.45-0.65mm,                                                 surface hardness HV800-900;                                                 with vacuum exhaust device,                                                    vacuum exhausting power: 2.2 kW
•    Sensor:                         PT131B, 50MPa; power 24V, output 0-10V 
•    Screw diameter:                 65/132 mm
•    Screw rotation direction:           different direction outwardly
•    Drive motor power:                  37 kW, AC motor
•    Inverter                            ABB or BOSCH-REXROTH
•    Quantitive feeding motor:         0.75 kW (AC motor )
•    Capacity Max:                    ≈250 kg/h (PVC material, vary with different                                     recipe and pipe size)
•    Vertical gearbox:                    high torque, low noise, hard gear face                                            special gearbox for extruder;                                                     Material of box: HT200 with tempering;                                         Material of gear: 20GrMnTi with                                                 carburizing ,quenching and grinding
•    Lubrication system:                 circulating oil enforced by oil pump; infiltration                                     and splash in oil basin
•    Barrel heating power:               21.4 kW
•    Barrel cooling power:               3×0.25 kW  enforced air cooling
Four Strand PVC 32 Pipe Extrusion Line

Features:
      Four strand design can produce four pipes at one time which can increase efficiency greatly.
      Technical parameter
      Die material:                       40Cr, forgings with tempering treatment
      Bolt grade:                         12.9 grade high strength bolt
      Flow channel surface:            chroming and mirror polishing
      Pipe range:                     Ø16~32mm
Four Strand PVC 32 Pipe Extrusion Line
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                                        
•    Center height:                1000 mm
•    Tank material:                  stainless steel
•    Tank length:                   4000 mm
•    Vacuum degree:                0~0.06MPa (adjustable)
•    Vacuum pump:                 2.2 kW  
•    Water pump:                   3.0 kW
•    Moving motor:                  0.75 kW
•    Cooling method:                immersion
•    Adjust range of forward and backward:           ±400 mm
•    Adjust range of up and down:                  ±50 mm
•    Adjust range of left and right:                    ±50 mm


Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
           Technical parameter                                   
•    Quantity of belts:                  8pcs
•    Effective length:               1000 mm
•    Max. Hauling force:             6000 N.m
•    Hauling speed:                 1-10 m/min
•    Clamping type:                 pneumatic 
•    Hauling motor:                  4×0.55 kW 
•    Control method:                ABB or BOSCH-REXROTH
           For cutting part
           Technical parameter                                     
•    Cutting type:                    knife cutting
•    Clamping type:                   pneumatic
•    Workbench moving method:         pneumatic
•    Cutting range:                   Ø16~32mm
•    Cutting motor:                       4×0.25 kW
•    Control method:                    Siemens PLC controller 

Four Strand PVC 32 Pipe Extrusion Line

•    Motor power:                4kW
•    Feeding port size:            240× 350mm
•    Rotor diameter:                Ø200mm
•    Rotating speed:                650rpm
•    Rotating blades:                3pcs
•    Fixed blades:                2pcs
•    Blade material:                Cr12MoV
•    Protection:                    overload emergency stop
•    Crushed material size:         <=8mm
•    Capacity:                    50-100kg/h
Four Strand PVC 32 Pipe Extrusion Line


Four Strand PVC 32 Pipe Extrusion Line

we can show you machine running anytime. Welcome to our factory for visiting. 
Besides, i can send some machine running vidoes for your reference.
Four strand PVC 32 Pipe Extrusion Line 
This four strand PVC 32 pipe extrusion line can produce the pipe size 32mm. this four strand PVC32 Pipe Extrusion Line is with big capacity, it is 4 production lines, can produce 4 pipes at same time. So the capacity is high. The pipe size is: 16-32mm diameter.
please check below machine pictures for your reference:
Four Strand PVC 32 Pipe Extrusion Line

Material :                           PVC (polyvinyl chloride)
Pipe size range:                     Ø16~32mm
Operating direction:                 from right to left
Center height:                       1000 mm
Machine color:                      Xinrong standard color (white)
Cooling water consumption:           8 m3/h  ( ≤20ºC,≥0.3MPa )    
Tank volume:                     12 m3 
Compressed air consumption:      0.5 m3/min ( >0.5MPa )
Total power:                         165kW
Actual power when operating:        100kW
Overall dimension:                   31000×3000×3000 mm
Control system:                   RKC temperature controller, Japan 
DC speed regulator:                Eurotherm, U.K 
Inverter:                     ABB or BOSCH-REXROTH
Low voltage electrical parts     
Button, switch                 Schneider, France 
Contactor                    Schneider, France
Air switch                     Schneider, France 
Intermediate relay             Schneider, France
Temperature controller          RKC, Japan
Heater                        magal alloy ceramic heater
l    Circumstance: 
Working place:               indoors
Power supply:                no dangerous area
Temperature:                 0-40ºC
Humidity:                    85% no condensation

Four Strand PVC 32 Pipe Extrusion Line


Vaulted cover, no distortion. National patent for principal axis airproof device. 
Self-friction or electric heating and steam heating function of the hot mixing.
•    Total capacity:                     200/500 L
•    Effective capacity:                  150/320 L
•    Vane rotation speed:                475/950/130 rpm
•    Motor heating power:                30/42/11 KW
•    Water consumption:                 4 t/h
•    Heating method:                    self-friction or electric heating
•    Discharge method:                  pneumatic or manual
•    Dimension (L×W×H):                3000×1500×2000 mm
•    Mixing time:                        10-12 min/pot
•    Cooling time:                       10-12 min/pot

Four Strand PVC 32 Pipe Extrusion Line

•    Screw, barrel:                    38CrMoAlA, nitriding and polishing,                                             depth of nitriding: 0.45-0.65mm,                                                 surface hardness HV800-900;                                                 with vacuum exhaust device,                                                    vacuum exhausting power: 2.2 kW
•    Sensor:                         PT131B, 50MPa; power 24V, output 0-10V 
•    Screw diameter:                 65/132 mm
•    Screw rotation direction:           different direction outwardly
•    Drive motor power:                  37 kW, AC motor
•    Inverter                            ABB or BOSCH-REXROTH
•    Quantitive feeding motor:         0.75 kW (AC motor )
•    Capacity Max:                    ≈250 kg/h (PVC material, vary with different                                     recipe and pipe size)
•    Vertical gearbox:                    high torque, low noise, hard gear face                                            special gearbox for extruder;                                                     Material of box: HT200 with tempering;                                         Material of gear: 20GrMnTi with                                                 carburizing ,quenching and grinding
•    Lubrication system:                 circulating oil enforced by oil pump; infiltration                                     and splash in oil basin
•    Barrel heating power:               21.4 kW
•    Barrel cooling power:               3×0.25 kW  enforced air cooling
Four Strand PVC 32 Pipe Extrusion Line

Features:
      Four strand design can produce four pipes at one time which can increase efficiency greatly.
      Technical parameter
      Die material:                       40Cr, forgings with tempering treatment
      Bolt grade:                         12.9 grade high strength bolt
      Flow channel surface:            chroming and mirror polishing
      Pipe range:                     Ø16~32mm
Four Strand PVC 32 Pipe Extrusion Line
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                                        
•    Center height:                1000 mm
•    Tank material:                  stainless steel
•    Tank length:                   4000 mm
•    Vacuum degree:                0~0.06MPa (adjustable)
•    Vacuum pump:                 2.2 kW  
•    Water pump:                   3.0 kW
•    Moving motor:                  0.75 kW
•    Cooling method:                immersion
•    Adjust range of forward and backward:           ±400 mm
•    Adjust range of up and down:                  ±50 mm
•    Adjust range of left and right:                    ±50 mm


Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
           Technical parameter                                   
•    Quantity of belts:                  8pcs
•    Effective length:               1000 mm
•    Max. Hauling force:             6000 N.m
•    Hauling speed:                 1-10 m/min
•    Clamping type:                 pneumatic 
•    Hauling motor:                  4×0.55 kW 
•    Control method:                ABB or BOSCH-REXROTH
           For cutting part
           Technical parameter                                     
•    Cutting type:                    knife cutting
•    Clamping type:                   pneumatic
•    Workbench moving method:         pneumatic
•    Cutting range:                   Ø16~32mm
•    Cutting motor:                       4×0.25 kW
•    Control method:                    Siemens PLC controller 

Four Strand PVC 32 Pipe Extrusion Line

•    Motor power:                4kW
•    Feeding port size:            240× 350mm
•    Rotor diameter:                Ø200mm
•    Rotating speed:                650rpm
•    Rotating blades:                3pcs
•    Fixed blades:                2pcs
•    Blade material:                Cr12MoV
•    Protection:                    overload emergency stop
•    Crushed material size:         <=8mm
•    Capacity:                    50-100kg/h
Four Strand PVC 32 Pipe Extrusion Line


Four Strand PVC 32 Pipe Extrusion Line

we can show you machine running anytime. Welcome to our factory for visiting. 
Besides, i can send some machine running vidoes for your reference.

Grain Processing Plant

We are the specialized and top manufacturers in China and We offer full set Seed Processing Line solution. Whole Seed Cleaning Plant is from Pre-cleaning, Fine cleaning, Destining, Gravityseparating, Beans polishing,Seed coating, Last seed weighing and packing.

The Seed Cleaning & Processing Line is composed of several single machines. Base on different grain type and processing grain, we will suggest appropriate grain cleaning machines. These grain cleaning machines arecollocated freely. Between each machines, there are  Bucket Elevator , Inclined Evator or other conveying equipment to link up.

Seed Cleaning & Processing Plant has followingadvantages:

Easy to setup, machines easyto move and can be placed freely.

Save labor, there are middleconveyors to transfer grain from one machine to another.

Effective and low cost, singlemachines compose a seed processing line improve the working performance. Lowproduction cost makes it hot sale.

Above flexibility andconvenience makes Seed Cleaning & Processing Plant makes it becoming hot sales item.

Seed Processing Line installationeffect and introduction.

This Grain Cleaning & Processing Plant iscomposed of 5XZC-5DX  Seed Cleaner & Grader, 5XZ-5  Gravity Separator, DTY Bucket Elevator, 5BYX-5 Seed Coating Machine, and HLD-50  Bagging Scale System.

Working flow: The seeds arefed into 5XZC-5DX Seed Cleaner &grader first. Seed cleaner & grader will remove the dust, lightimpurity, oversize and undersize impurity before seed flow into 5XZ-5 gravity separator. During seeds cleaned by Gravity Separator, the seeds are separated by density difference. Thepartially eaten seeds, immature seeds, insect damaged seed, sick seeds, moldyseeds are separated from good healthy seeds. Then seeds go on being lifted by DTY Bucket Elevator, falling into the 5BYX-5 Seed Coating Machine. During the seed coating procedure, the chemical,fertilizer or other protective liquidity will be coated to seeds' surface andimprove seeds' germination rate. Finally seeds being transferred to Weighing Scale . Seeds will be weightedand packed to bags ready for sell.

Grain Processing Plant

Seed Processing Line

Grain Processing Plant


Seed Cleaning & Processing Line




Grain Processing Plant

Grain Processing Plant,Grain Processing Machine,Grain Wheat Processing Plant

Hebei HELIDA Grain Selecting Machinery Technology Co., Ltd. , http://www.grainseedscleaner.com

Posted on