Coriolis Mass Flow Meter for LPG, Liquid and Gas

Model NO.: UICMF
Measuring Media: Liquid and Gas
Measuring Principle: Physical Properties Fiber Optic Sensor
Measurement Object: Closed Pipeline
Certification: JIS, DIN, ANS, GB, CE, ISO
Flow Fluid Measured: Liquid, Air, Solid Flow
Output Signal: 4-20mA, Pulse, RS485, Hart
Indicate: Transient Flow+Accumulated Flow + Density + Temper
Fluid Types: Two-Phase Flow, Three-Phase Flow
Modulation Formats: Frequency State Modulation
Output Signal Type: Digital Type
Production Process: Integration
Functional Type: Functional
Accuracy Grade: 0.2g
IP Rating: IP65
Trademark: U-ideal
Transport Package: Wooden Case or Carton
Specification: sgs, iso
Origin: Tianjin, China
HS Code: 90261000

Introduction 

DMF-1-Series Coriolis Mass Flow Meters' measuring principle is based on the controlled generation of Coriolis forces. The measurement would not be affected by the pressure, temperature, viscosity, density, etc. And the compensation calculation is not required. The structure contains two parts: Sensor & Transmitter. The Coriolis Mass Flow Meters are designed and manufactured based on the national standard of safe explosion proof. The Explosion- proof standard is EX d ib II C T5 Gb.
 
The mass flow meter does not measure the volume per unit time (e.g., cubic meters per second) passing through the device; it measures the mass per unit time  (e.g., kilograms per second) flowing through the device. The accuracy of the Coriolis Mass Flow Meters is ±0.1%~ ±0.2%. The application range is large. (It could be used to measure all sorts of all sorts non-newtonian fluid, slurry, suspensions, high viscosity fluid, etc.) The requirements for the installation are low. (The straight pipe requirements in front of and behind the Coriolis Mass Flow Meters are low.) They are more reliable, stable, and the maintenance level is low.

Technical Parameters

 
Applications 		Suitable for Liquid, Gas, Liquid- Solid, Gas- Solid, Liquid- Gas Mass Measurement or volume measurement
Material of the Measurement Pipeline SS 316L/ HC Hastelloy
Pressure Please refer to the chart shown above. Special orders would be placed for high pressure.
 
Medium Temperature 		-50ºC~+150ºC; (Highest Temperature: +350ºC;
Lowest Temperature: -300ºC could be special ordered.)
Environment Temperature Sensor:-40ºC~+150ºC; Transmitter:-20ºC~
+70ºC
Flow Rate Measurement Accuracy ± 0.2% ,± 0.1% optional
Density Measurement Accuracy ±0.002g/cm³,±0.001g/cm³ optional
Repeatability ±0.10% Flow Rate ±[½(Zero Point Stability/Flow Rate)×100]% Flow Rate
 
Output Signal 		4~20mA   Load Resistance <500Ω(Instantaneous
or Density optional); 0~10kHz Instantaneous Flow Rate Pulse Signal; Standard RS 485 Communication
Explosion- Proof Symbol EX d ib   II C T5 Gb

Model selection
Micro Flow Meter- DMF-1-1; DMF-1-2
 

Model		 DN Measurement scope ( kg/h ) Work Pressure  ( MPa ) Connection type (mm)
DMF-1-1-AB 1.5 0~4 0~32 Weld Joints Φ6×1.5
DMF-1-1-A 3 0~40 0~32 Weld Joints Φ6×1.5
DMF-1-1-B 6 0~100 0~25 Weld Joints Φ10×2
DMF-1-2-A 8 0~200 0~20 Weld Joints Φ10×1
 
Medium-Small Flow Meter: DMF-1-3; DMF-1-4; DMF-1-5-A
                                                                 
 
Model 		 
DN 		Measurement scope (kg/h) Work Pressure (MPa)  
Connection Type(mm)
DMF-1-3-A 10 0~500 0~25 Weld Joints Φ20×4
DMF-1-3-B 15 0~1000 0~25 Weld Joints Φ20×3
DMF-1-4 20 0~3000 0~25 Weld Joints Φ20×2
DMF-1-5-A 25 0~10000 0~25 Weld Joints Φ31×3
             
Large-scale Flow Meter: DMF-1-3; DMF-1-4; DMF-1-5; DMF-1-6
 
High pressure could be special ordered. (4~70MPa)
 
 
Model 		 
DN 		Measurement scope (t/h) Work Pressure (MPa)  
Connection Type(mm)
DMF-1-3-A 10 0-0.5 0~4 Flange 10
DMF-1-3-B 15 0-1.0 0~4 Flange 15
DMF-1-4 20 0-3.0 0~4 Flange 20
DMF-1-5-A 25 0-10 0~1.6 Flange 25
DMF-1-5-B 40 0-20 0~1.6 Flange 40
DMF-1-6-A 50 0-30 0~1.6 Flange 50
DMF-1-6-AB 65 0-50 0~1.6 Flange 65
DMF-1-6-B 80 0-100 0~1.6 Flange 80
DMF-1-6-C 100 0-150 0~1.6 Flange 100
DMF-1-6-CD 125 0-200 0~1.6 Flange 125
DMF-1-6-D 150 0-300 0~1.6 Flange 150
DMF-1-6-E 200 0-500 0~1.6 Flange 150

 

 

PET Jar Preform Mould

PET jar preform mould for producing big neck of PET preforms, such as candy bottle, cosmetic bottle, can and so on. With the advanced technology and good imported material support, compared with the tranditional preform mould, our mold cavity broekn rate is much lower. The guarantee is 1 million shots. It suitable for all PET injection machine in market.

Pet Preform Mold,Pet Jar Preform Mould,Pet Tube Preform Mold,Pet Preform Injection Mould

WENZHOU WINIBER MACHINERY EQUIPMENT CO., LTD. , https://www.winibermachine.com

Posted on