|                     The structure of the CNC Metal V Groover Machine    |
|
This equipment is fully CNC V Groover Machine for metal sheet. It adopts advanced CNC system and innovative design with the advantages of high processing precision, simple operation, no noise, no vibration and so on. It is widely used in the sheet metal V-groove, U-groove and other irregular groove processing(including stainless steel, aluminum, aluminum plate, copper, iron, plastic, wood, acrylic panels and other special plates.). Particularly, it is applicable to the V-groove processing of sheet metal before bending . Â |
|
 The clutch gives continuous strokes for mass production. 1.The Press adopts the low inertia combined dry pneumatic friction clutch and brake from OMPI, Italy, Smoother pres s performance, easier maintenance, to ensure reliable safety and flexible action,Iow noise, long service life. 2.Driving gear is installed into the frame and gear is immersed in oil reservoir. Customer could choose Electromagnetic governor. which is stepless speed regulation within a certain range and enlarge the area of craf. 3.Use adopts dual valve from TACO, Japan, which can guarantee the safety and reliability of clutch. 4.Pneumatic dual balance cylinder, which balances the slide block and punch weight to reduce noise and impact; 5.The press adopts cam controller which be combined with proximity switch (Schneider) which will realize the synchronous detection and monitoring reliably. |
| Application Areas |
|
1.precision:within 0.04mm 2.PLC system,easy to operate 3.widely use,v grooving all the metal steel 4.customize to your need 5.cnc with servo motor 6.Pneumatic drive environmental friendly 7.We stand at the top design. 8.Whole welding structure 9.Long using life and high rigidity. Â |
Technical Specifications
|  | Technical parameters | 3200mm | 4000mm | 5000mm | 6000mm |
| 1 | Thickness (mm) | 0.4-6 | 0.4-6 | 0.4-6 | 0.4-6 |
| 2 | Length(mm) | 3200 | 4000 | 5000 | 6000 |
| 3 | Width of sheets (mm) | 100-1500 Optional |
100-1500 Optional |
100-1500 Optional |
100-1500 Optional |
| 4 | Grooving speed(m/min) | 15-60 | 15-60 | 15-60 | 15-60 |
| 5 | Plate speed (m/min) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
| 6 | Y axis Minimum unit | 0.01 | 0.01 | 0.01 | 0.01 |
| 7 | Y axis Minimum positioning accuracy | 0.05 | 0.05 | 0.05 | 0.05 |
| 7 | Z axis Minimum unit | 0.01 | 0.01 | 0.01 | 0.01 |
| 9 | Z axis Minimum positioning accuracy | ±0.01 | ±0.01 | ±0.01 | ±0.01 |
| 10 | X axis Motor power(kw) | W=3 | W=3 | W=3 | W=3 |
| 11 | Y axis Motor power(kw) | W=2 | W=2 | W=2 | W=2 |
| 12 | Z axis Motor power(kw) | W=0.4 | W=0.4 | W=0.4 | W=0.4 |
| 13 | Air pressure (Mpa) | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
| 14 | Dimension (L*W*H) | 5200*2100*2300 | 6000*2100*2300 | 7000*2200*2300 | 8000*2200*2300 |
| 15 | Weight | 9Â ton | 11ton | 14ton | 16ton |
| 16 | Shipping | 20GP | 40GP | 40GP | 40GP |
The general logistics automatic Sorting System workflow is mainly divided into confluence → sorting signal input → sorting and diversion → sorting.
1. Confluence: The materials picked from different positions according to the picking instruction are sent to the pre-processing equipment in a certain way, and collected by the pre-processing equipment to the main conveyor line. This process is called confluence.
2. Sorting: The signal input reaches the material on the main conveyor line, and the basic information of the material is read through an automatic identification device (such as a barcode scanner, etc.), and the computer handles the read material information accordingly. This process is called Input for sorting signal.
3. Diversion: After the material information is read into the computer system, it continues to move on the main conveying line. The storage rack sorting system detects the moving position of the material in real time. When the material reaches the corresponding sorting crossing, the control system sends a sorting mechanism to the sorting mechanism. After picking up the order, the sorting mechanism immediately produces corresponding actions to make the material enter the corresponding sorting gate, this process is called diversion.
4. Sorting: The materials entering the sorting crossing finally reach the terminal of the sorting system, and are sorted and transported to the corresponding area by manual or mechanical handling tools.
The essence of retail in the future will remain cost, efficiency and experience at the center. The sorting capacity of some sorting centers can reach 9,000 pieces per hour. Under the premise of the same site size and sorting volume, it is estimated that each site can save 180 manpower.
Sorting System,Sortation Conveyor,Conveyor Sorting Systems,Conveyor Line Sorting System
DMT Machineries (Suzhou) Ltd , https://www.dmtsz.com