Model NO.: LB1000
Layout Type: Verticle
Mixing Drum Shape: Circular Groove
Operating type: Cycle Operating
Condition: New
Productivity: 80 T/H (Moisture 5%, Temperature 170ºC)
Mixer Capacity: 1000kg
Mixing Type: Twin-Shaft
Guarantee: 12 Months
Overseas Service: Available
Operation System: Manual/Semi-Automatic/Full-Automatic
Total Power: 262kw (Oil, Not Including End Product Storage Bin)
Voltage: 380 V / 50 Hz
Trademark: BEST
Transport Package: Container
Specification: configuration
Origin: Shandong, China
HS Code: 84743200
China New hot Mix LB1000 80 T/H Asphalt Mixing Plant Main systems :Â
1.Cold aggregate supply system :Â
   Cold hopper :  4pcs x 9m3
   Sidewall belt :  500mmÂ
2. Aggregate drying and heating system
    Drying drum  : Ф1.6m x 6.5m , 10mm thick, with 50mm insulation layer and stainless shell
    Burner : oil (comsuption≤6.5kg/t) , coal , gasÂ
  Heavy oil tank : 1pc x 50m3Â
  Diesel tank : 1pc x 5m3Â
3. Screening, weighing and mixing system
    Screening capacity:100t/h(specification 0-4mm <35%)
    Mode : Double motor  linear vibrationÂ
    Filler scale : 1-100kg , accuracy : ±0.1 kg
    Bitumen scale : 1-100kg , accuracy : ±0.1 kg
    Mixer :  Horizontal twin-shaft , capacity 1300kg/batch, mixing cycle : 45 s
    Lining board and mixing blade life reaches to 100000 batches
    Hot bin : 4 compartment, capacity 26t, 2pcs level detectors
4.Filler supply system
    Stone powder silo : 20m3, with dust collector and 2pcs level detectors
    Recycled powder silo : 10 m3 , with dust collector and 2pcs level detectors
5.Bitumen supplying and heating system
    Hot oil stove : 300000Kcal/h;Highest temperature 280ºC
    Bitumen tank : 1pc x 50m3, 50~100mm Insulation layer , covered by color steel , 200m hot oil coil
    pipe, liquid level indicator, mixer connector
6.Pneumatic system
   Screw air compressor : 4m3/min
   Gas tank : 2 x 300LÂ
7.Dust collection system
   Two-stage dust collection :  gravity dust collection, efficiency≥85%, Nomex bag dedustor, emission
    ≤50mg/Nm3
8.Electric control system
   Siemens PLC, Advantech IPC,Lenovo displayer , HP printerÂ
9.End product storage system (optional)Â
   Single bin underneath , volume 20t, 50mm heat preservation cotton, discharging heigh 4m,
   discharging gate with heating deviceÂ
ASPHALT MIXING PLANT LB1000-LB5000 (80T/H -- 400T/H )Parameters:
| Type | LB1000 | LB1500 | LB2000 | LB2500 | LB3000 | LB4000 | LB5000 | |
| Rated Productivity(t/h) | 80 | 120 | 160 | 200 | 240 | 320 | 400 | |
| Cold aggregate supply system | Feeder hopper (pcs) | 4 | 4 | 5 | 5 | 5 | 6 | 6 |
| Hopper volume(m3) | 9 | 9 | 9 | 9 | 13 | 13 | 13 | |
| Loading width(mm) | 3300 | 3300 | 3300 | 3300 | 3600 | 3600 | 3600 | |
| Drying system | Drying drum Ф×L(m) | 1.6 x 6.5 | 1.8 x 7.2 | 2.2 x 8.0 | 2.5 x 10 | 2.5 x 10 | 2.75 x 11 | 2.9 x 12 |
| Driving power(kw) | 4 x 5.5 | 4 x 5.5 | 4 x 15 | 4 x 18.5 | 4 x 18.5 | 4 x 22 | 4 x 30 | |
| Burner capacity(mw) | 7 | 11 | 14 | 18 | 20 | 28 | 35 | |
| Fuel | Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Diesel, heavy oil or gas | |||||||
| Mixing tower | Vibration mode | Double motor linear vibration | Double shaft linear vibration | |||||
| Screen driving power (kw) | 2 x 2.35 | 2 x 3 | 2 x 11 | 2 x 11 | 2 x 15 | 2 x 18.5 | 2 x 18.5 | |
| Screen layer | 4 | 4 | 5 | 5 | 5 | 6 | 6 | |
| Hot bin volume (m3) | 13 | 13 | 22 | 22 | 70 | 100 | 100 | |
| Mixer capacity(kg/batch) | 1200 | 1700 | 2200 | 2700 | 3200 | 4250 | 5250 | |
| Mixer driving power(kw) | 37 | 45 | 2×37 | 2 X 37 | 2×37 | 2×45 | 2×55 | |
| Filler supply system | Stone powder silo volume(m3) | 20 | 25 | 35 | 35 | 50 | 60 | 60 |
| Recycled powder silo volume(m3) | 10 | 15 | 20 | 20 | 50 | 50 | 50 | |
| Dust collection system | Dust collection mode | Primary gravity dust collection + secondary bag filter impulse cleaning | ||||||
| Filtering area(m2) | 420 | 528 | 621 | 660 | 896 | 1200 | 1500 | |
| Bitumen supply system | Bitumen tank quantity X  volume(m3) | 1×50 | 1×50 | 2×50 | 2 X 50 | 3×50 | 4×50 | 5×50 |
| Hot oil furnace(×104kal/h) | 30 | 30 | 60 | 60 | 80 | 100 | 120 | |
| Total power (kw) | 270 | 310 | 470 | 510 | 610 | 740 | 830 | |
| Covering area (m) | 40 x 30 | 40 x 30 | 45 x 35 | 45 x 35 | 53 x 35 | 56 x 40 | 58 x 45 | |
| Optional | End product underneath storage (m3) |
13 | 13 | 30 | 30 | 40-120 | 40-120 | 60-150 |
| End product side storage(m3) | Â Â Null | Null | 50 | 50 | 120 | 120 | 150 | |
Component brand :
Product details :Â
Workshop :Â Â
Â
Aumax Brand LB Series robot arms are mainly fixed on vertical plastic injection molding machine.
Robot arms are used to pick up plastic products and plastic sprues, plastic runners from injection molding machine.
Gripper rotation structure
Gripper can turn 90 degree out the mold and release the sprue and parts smoothly
Chiness and English
Language can be switched between Chinese and English
Mid-Mold induction
The arm wont go down if the mid-mold is not confirmed the signal
Prevent arm dropping
When air pressure is lower, it wll alarm and the falling proof cylinder will eject automatically to prevent arm descending.
Conveyor I/O Point
The pendant can control conveyor running
LB Vertical Manipulator Series
LB Vertical Manipulator Series,Robot Arm for Vertical Injection Machine
Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com