Buy a car also have to see the quality! Inventory of the 6 engines with the lowest failure rate


Choosing a car that is satisfactory is just like getting a wife and getting married. Not only is it necessary to look at the outside, but more importantly is whether its own quality is excellent. With the rapid development and growth of the domestic automobile market, car quality problems have gradually surfaced. As the core component of the car, the engine is even more critical. Once quality problems arise, the latter will bring the owner a headache. Today, the car is said to introduce six models, born with a low failure rate engine.

6. Lexus: failure rate is 0.99%

零部件,发动机

As a Toyota high-end brand that always wins with quality, Lexus not only shows the world the "ingenious" concept of making a car, but also controls the quality of the engine to achieve the same high level of water. According to the results of the survey, each Lexus 101 Of the cars, only one had an engine problem and the failure rate was only 0.99%.

5. Jaguar: The failure rate is 0.97%

零部件,发动机

The quality of British cars has been criticized for a long time, and even the British themselves often joking about this. However, over time, they also started to design and develop high-quality engines. According to the survey results, only one vehicle has a failure rate in every 103 vehicles, and the failure rate is only 0.97%.

4. Volvo: The failure rate is 0.90%

零部件,发动机

Volvo not only uses security as a selling point. Many small partners do not know that the brand from Scandinavia is also involved in the control of quality. According to the survey results, there are engine problems in every 111 Volvo cars. Only 1 vehicle, the failure rate is as low as 0.90%.

3. Mercedes Benz: The failure rate is 0.84%

零部件,发动机

零部件,发动机

As the “inventor of the car”, Mercedes-Benz has always been the industry leader in the research and development of this engine. According to surveys, only 1 out of every 119 Mercedes-Benz vehicles have engine problems and the failure rate is only 0.84%. In contrast, BMW's failure rate is bit. 221%, and Audi's failure rate is as high as 3.57%.

2. Toyota: The failure rate is 0.58%

It is a pity that many small partners have always considered Volkswagen as synonymous with “durable and durable.” In our list today, the top two brands are brands from Japan, and the second place emphasizes “ "Fine manufacturing" Toyota, in fact, in North America, Toyota's models, has for many years been "the lowest mechanical failure rate in North America," the award, according to surveys, out of every 171 cars, only 1 vehicle engine problem, failure rate Only 0.58%.

1. Honda: The failure rate is 0.29%

零部件,发动机

Honda is the most popular manufacturer of naturally aspirated engines. This is also recognized in the industry. Its i-VTEC engine also has a very high reliability. According to surveys, only 1 out of every 344 Honda vehicles has appeared. The quality problem, with a failure rate of only 0.29%, won the first place on this list.

Car said: Today's cars are not a single product. Many of the high-tech products that they carry, as well as future design concepts, even engulfed and obscured the most basic quality of automobiles. As consumers, the choice of car The point is quality, and the engine is the key. If there is no quality as a starting point, then high-end cars are only extra luxury.



Wire Industrial UV Adhesive

Glass/Metal UV adhesive is a one-component, UV Curable Adhesive.solvent free adheisve.it can be cured with in a few seconds under ultroviolet light.After curing UV adheisve has high bonding strength, Mainly used for parallel connection, solder joint protection, cable fixing, bonding of wires and other components, sealing and waterproofing.
Characteristics of UV adhesive in wire industry:
1. Fast curing speed: It can be cured quickly under ultraviolet irradiation, and preliminary curing can usually be achieved within a few seconds to tens of seconds, which meets the production scale of wire rods.
2. High bonding strength: It has good bonding effect on common materials in the wire industry, such as various metals (such as copper, aluminum), plastics (such as PVC, PE, PP) and rubber, and can firmly connect different materials. The wires or wires made of the same material are bonded together with other components to ensure that there will be no glue opening or degumming during use.
3. Good flexibility: After the UV glue is cured, the adhesive layer has a certain degree of flexibility and can adapt to the bending, torsion, stretching and other deformations that may occur during use of the wire, preventing the adhesive layer from cracking due to the deformation of the wire, ensuring good adhesion. long-term reliability of the joint.
4. Good anti-vibration performance: During the use of wires, they may be subject to various vibrations and impacts. UV glue has good anti-vibration properties and can maintain the stability of the bonding between wires or between wires and other components. Not easy to loosen or fall off.
5. Good insulation performance: It has excellent electrical insulation performance and can be used for wire parts that require insulation, such as insulation packaging of wire joints. It can prevent short circuits and leakage between wires and ensure electrical safety.
6. Moisture resistance and waterproof performance: The use of UV glue can effectively prevent the intrusion of moisture, avoid problems such as moisture, corrosion or short circuit in the wire caused by moisture penetration, and protect the performance and life of the wire. It has good moisture resistance and can maintain bonding stability even in high humidity environments.

Fast curing UV adhesive,ultraviolet glue,solder joint protection uv adhesive,FPC cable fixing uv adhesive,Sealed and waterproof uv adhesive

Dongguan Shuangzhan Industrial Co.,Ltd , https://www.lingwogroup.com

Posted on