>Material: ASTM A532 15/3CrMo white iron, vacuum brazed onto mild steel base plate.
>Hardness: 700BHN / 63HRC
>Provide good abrasion resistance,high impact toughness;
>Installation: weld or by studs
Our Output for wear blocks is 100tons/month. usual inventories is about 100tons.
Output of overlay wear plate is 2000 sqm/month. Usually inventories is about 500sqm.
Â
Plant area is about 5000 sq.m
Staffs: 87
Registered capital is 8 million RMB
Annual sales is about 600-800tons for wear blocks, 600tons for overlay wear plates.
Â
If you are looking for high quality wear-resistant or casting products, then you are just in the right place, please feel free to contact us with any inquiries, we are ready at your service at anytime.Â
Laminated Wear Blocks are unique wear resistant materials in that they combine very high wear resistant qualities of a high chrome cast iron (15/3CrMo, 700 BHN - 63 HRc) with a weldable & high impact toughness mild steel through a metallurgical bond to create a product that is exceptionally resistant to impact and abrasion while retaining.
We can also product other Bucket wear attachments.
>Bucket teeth.
>G.E.T. parts.
>Heavy duty equipment wear parts
>spare parts. Heel shrouds
>Bucket repaire and fabrication.
>White iron Castings.
>bi-metallic castings.
>Bimetal pipes
>shredder hammer tips
>Tungsten carbide wear parts.
>Ni-hard 4 wear plates, wear billets
Â
Chocky bars | CB25, CB40,CB50,CB65, CB80,CB90, CB100,CB130,CB150 |
Wear buttons | WB6, WB75, WB90, WB110, WB115, WB150 |
Wear blocks(standard) | DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 |
Hammer tips | DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm |
Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
 1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
 2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
 3) Shaped wear bars
 4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
 5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
 6) Bi-metallic wear plates
 7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
 8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
 9) Wafer strips, WS25, WS40, WS50, WS65;
 10) Elbow wear blocks
 11) Other sizes and shapes
 12) Multi-function gradient cutter tooth
 13) Rockbox liners
 14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
Please contact us if you have any questions or comments:
 Bimetallic white iron wear plates for iron ore feeder chute
>Material: ASTM A532 15/3CrMo white iron, vacuum brazed onto mild steel base plate.
>Hardness: 700BHN / 63HRC
>Provide good abrasion resistance,high impact toughness;
>Installation: weld or by studs
Our Output for wear blocks is 100tons/month. usual inventories is about 100tons.
Output of overlay wear plate is 2000 sqm/month. Usually inventories is about 500sqm.
Â
Plant area is about 5000 sq.m
Staffs: 87
Registered capital is 8 million RMB
Annual sales is about 600-800tons for wear blocks, 600tons for overlay wear plates.
Â
If you are looking for high quality wear-resistant or casting products, then you are just in the right place, please feel free to contact us with any inquiries, we are ready at your service at anytime.Â
Laminated Wear Blocks are unique wear resistant materials in that they combine very high wear resistant qualities of a high chrome cast iron (15/3CrMo, 700 BHN - 63 HRc) with a weldable & high impact toughness mild steel through a metallurgical bond to create a product that is exceptionally resistant to impact and abrasion while retaining.
We can also product other Bucket wear attachments.
>Bucket teeth.
>G.E.T. parts.
>Heavy duty equipment wear parts
>spare parts. Heel shrouds
>Bucket repaire and fabrication.
>White iron Castings.
>bi-metallic castings.
>Bimetal pipes
>shredder hammer tips
>Tungsten carbide wear parts.
>Ni-hard 4 wear plates, wear billets
Â
Chocky bars | CB25, CB40,CB50,CB65, CB80,CB90, CB100,CB130,CB150 |
Wear buttons | WB6, WB75, WB90, WB110, WB115, WB150 |
Wear blocks(standard) | DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 |
Hammer tips | DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm |
Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
 1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
 2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
 3) Shaped wear bars
 4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
 5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
 6) Bi-metallic wear plates
 7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
 8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
 9) Wafer strips, WS25, WS40, WS50, WS65;
 10) Elbow wear blocks
 11) Other sizes and shapes
 12) Multi-function gradient cutter tooth
 13) Rockbox liners
 14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
Please contact us if you have any questions or comments:
Â
PVC Steel Reinforced Hose Machine
PVC Steel Reinforced Hose Machine ,which uses the highly effective & high speed extruding machine,
it guarantees the material plasticizing quality and the output.Special design steel wire torsion machine,
the torsion evenly & consistently and has the long continuous production time.
The special design's tubing nose produces the high tubing transparency,
steel wire distribution is even,the length can be set up willfully.
The unit main electric appliance part both uses the imported product and the movement stably reliable.
The unit all control pressed key uses the integration design,the operation simple and quickly.
Pvc Steel Reinforced Hose Machine,Steel Reinforced Hose Machine,Steel Wire Reinforced Hose Machine,reinforcing steel making machine
zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com