Drive wheel quenching The drive wheel and guide wheel of the machine tool can only be heated and quenched on a dedicated quenching machine because of its special structure, but the machine tool is not complicated. Its characteristics are: usually a single slot or multiple slots for heat quenching; heating, in order to uniform the width of the slot along the width of the quenching transformer sensor group need to swing around.
When the driving wheel quenching machine tool driving wheel is a casting, it can be installed; when the driving wheel quenching machine driving wheel is composed of a wheel hub and a ring gear, the gear ring can also be mounted on the auxiliary jig for heating and quenching, and then loaded. On the hub. Quench transformers and inductors are mounted on brackets that can be lifted up and down and swing back and forth.
When the driving wheel quenches the driving gear slot of the machine tool and adjusts it to the specified position, the positioning mechanism and the quenching transformer inductor group advance in the direction of the slot, the inductor head enters into the slot, heating starts, and the bracket swings back and forth; one tooth slot is heated to After warming, the carriage moves back, the indexing mechanism performs indexing, the sensor moves forward, the sprayer below the sensor performs spray quenching, and the second tooth slot begins to heat, and so on.
The drive wheel quenching machine also has a vertical design, which can heat all the slots at one time and the swing becomes up and down.
When the driving wheel quenching machine tool driving wheel is a casting, it can be installed; when the driving wheel quenching machine driving wheel is composed of a wheel hub and a ring gear, the gear ring can also be mounted on the auxiliary jig for heating and quenching, and then loaded. On the hub. Quench transformers and inductors are mounted on brackets that can be lifted up and down and swing back and forth.
When the driving wheel quenches the driving gear slot of the machine tool and adjusts it to the specified position, the positioning mechanism and the quenching transformer inductor group advance in the direction of the slot, the inductor head enters into the slot, heating starts, and the bracket swings back and forth; one tooth slot is heated to After warming, the carriage moves back, the indexing mechanism performs indexing, the sensor moves forward, the sprayer below the sensor performs spray quenching, and the second tooth slot begins to heat, and so on.
The drive wheel quenching machine also has a vertical design, which can heat all the slots at one time and the swing becomes up and down.
This production line can produce 2.0-20 tons of biomass particles with a diameter of 6/8 mm, using waste building formwork as raw material. The core part of this production line is two SHD760 high-efficiency centrifugal granulators.
Biomass Pellet Line,Granulator Biomass Production Line,Sawdust Pelletizer Production Line,Sawdust Pelletizer Production Line
Jinan Shanghangda Machinery Co., Ltd. , http://www.jinanshdmachine.com