| Volume | L330M*Â W170MMÂ *H350MM |
| Net Weight | 15KG |
| Voltage | 220V-250VÂ 50HZ/60HZ |
| Power Rating | 1.8KWÂ Â Â Â |
| InflatingSpeed | 2800R/Min |
| Noise | MAX 76DB |
| Air Flow Rate        | 72L/Min |
| Working Pressure | 0-380BAR 0-38MPA 0-5500PSI |
| Cooling System | Water Cooling |
| Compression Stage | Two Stage |
| Lubrication Mode | Splash Type |
| Special Function |
This model's working pressure can be 38MPA, but for the safe of use we will set only 30-32MPA before delivery.Â
If you need to be 38MPA, please leave me message.
We'd like to remind you that:
1. you'd better make sure that your container can bear 38MPA otherwise it is not safe.
2. We suggest that only buyer who is with experience of using this kind pump to ask for 38MPA. We don't suggest a beginner to try it. For the beginners our machine's default pressure is set to 30-32MPA for you.
|
| Material of Motor | 100% Pure Copper |
| Oil: |
50 or 100# reciprocating air compressor oil ( or 5W-40 oil ) Â (the machine is without of oil because the oil is not allowed in the plane) |
| Test Inflating Result |
It takes 3 mins to fill full 350CC tank to 300BAR It takes 5 mins to fill full 450CC tank to 300BAR It takes 15 mins to fill full 1L tank to 300BAR |
Â
| Volume | L330M*Â W170MMÂ *H350MM |
| Net Weight | 15KG |
| Voltage | 220V-250VÂ 50HZ/60HZ |
| Power Rating | 1.8KWÂ Â Â Â |
| InflatingSpeed | 2800R/Min |
| Noise | MAX 76DB |
| Air Flow Rate        | 72L/Min |
| Working Pressure | 0-380BAR 0-38MPA 0-5500PSI |
| Cooling System | Water Cooling |
| Compression Stage | Two Stage |
| Lubrication Mode | Splash Type |
| Special Function |
This model's working pressure can be 38MPA, but for the safe of use we will set only 30-32MPA before delivery.Â
If you need to be 38MPA, please leave me message.
We'd like to remind you that:
1. you'd better make sure that your container can bear 38MPA otherwise it is not safe.
2. We suggest that only buyer who is with experience of using this kind pump to ask for 38MPA. We don't suggest a beginner to try it. For the beginners our machine's default pressure is set to 30-32MPA for you.
|
| Material of Motor | 100% Pure Copper |
| Oil: |
50 or 100# reciprocating air compressor oil ( or 5W-40 oil ) Â (the machine is without of oil because the oil is not allowed in the plane) |
| Test Inflating Result |
It takes 3 mins to fill full 350CC tank to 300BAR It takes 5 mins to fill full 450CC tank to 300BAR It takes 15 mins to fill full 1L tank to 300BAR |
Â
1.5-6x1800 Cnc Steel Coil Cut To Length Line
General description
Our automatic cut to length production line is high-speed and precise with workstations for uncoiling, straightening, measuring, cross-cutting to length and folding. The machine consists of feeding truck, assisting support, decoiler, hydraulic shear, leveler, stop block, encoder scale, plate shearing machine, conveying table, pneumatic stacker, output trolley, hydraulic system and so on. The whole line is controlled by PLC with computer display. We mainly apply computer-control system of brands Mitsubishi, Yaskawa, Siemens, Baumueller, Delta, and Schneider. The thickness for material can be from 0.2mm to 12mm, width from 300mm to 2000mm, load weight above 25T, cutting precision 0.5mm/m, line speed 60m/min
The main technique parameters
Coil Type
Carbon steel.low alloy steel plate.stainless plate.aluminium plate
Thickness
1.5-6mm
Width
900-1800mm
Coil inner Dia
ï¿ 762mm
Coil outer Dia
ï¿ 2000mm
Coil weight
≦30T
Line speed
≦25m/min
Shearing length
2-8m
Piling weight
15T
3-12x2000 cnc 1.5-6x1800 CNC Steel Coil Cut To Length Line
The main technique parameters
| Coil Type | Carbon steel.low alloy steel plate.stainless plate.aluminium plate |
| Thickness | 3-12mm |
| Width | 900-2000mm |
| Coil inner Dia | ï¿ 762mm |
| Coil outer Dia | ï¿ 2100mm |
| Coil weight | ≦35T |
| Line speed | ≦25m/min |
| Shearing length | 2-10m |
| Piling weight | 15T |
4-16(5-20)x2150 cnc steel coil cut to length line
The main technique parameters
Coil Type
Carbon steel.low alloy steel plate.stainless plate.aluminium plate
Thickness
4-16(5-20)mm
Width
1200-2150mm
Coil inner Dia
ï¿ 762mm
Coil outer Dia
ï¿ 2100mm
Coil weight
≦35T
Line speed
≦25m/min
Shearing length
2-12m
Piling weight
15T
CNC Steel Coil Cut To Length Line
Cnc Steel Coil Cut To Length Line,Cut To Length Machine,Metal Cut To Length,Cut To Length Line Machine
Shandong Zecheng CNC Machinery Co., Ltd , http://www.zccncmachinery.com