20T hydraulic pulling mooring winch:
Application: Marine,Ocean,offshore ,harbor,etc.
Description:
• Drive:Electric/Hydraulic /Manual Driven
• Configuration:Single/Double Drums
• Drum Rope:P.P Rope or SWR
• Rated Pull:1 Tones  To 350 Tones (1st Layer)
• Brake Holding:Up To 450 Tonnes  ( Static, 1st Layer)
• Wire Speed:Complying to ISO/Classification Society rules
• Clutch:Manual /Hydraulic Operated Jaw Clutch
• Brake:manual/Hydraulic Released Band Brake
• Control:Local Control Console and/or remote Control Panel
spooling device is optional
Our Advantages:
• Customized design for different clients. Â
• Profound experience in manufacturing and overseas market
• Certification: ABS, GL, LR, BV, NK,DNV, KR,CCS,etc..
Technical Data:
| Drum load | Holding load | Speed | Â Dia | Length | |
| Nylon rope | SWR | ||||
| kN | kN | m/min | mm | mm | m |
| 50 | 150 | 15 | 45 | 20 | 180 |
| 80 | 240 | 15 | 50 | 26 | 200 |
| 100 | 310 | 15 | 55 | 28 | 200 |
| 125 | 360 | 15 | 64 | 30 | 200 |
| 160 | 480 | 15 | 75 | 28 | 250 |
| 200 | 630 | 15 | 90 | 40 | 250 |
| 250 | 630 | 12 | 90 | 40 | 250 |
20T hydraulic pulling mooring winch Related products:
Our company:
Â
Main features:
1. The drilling machine has high input power, high output torque and strong drilling capacity.
2. The output speed range of the drilling machine is wide, which is suitable for both engineering geological investigation and diamond core drilling.
3. The drilling machine is equipped with an open box rotator for easy operation of the orifice.
4. The utility model has an oil pressure feeding mechanism and a ball clamp type clamping mechanism at the upper end of the vertical shaft, which can improve the drilling efficiency and reduce the labor intensity of the workers.
5. The drilling rig is equipped with active drill pipe, which can realize non-stop reversing, with high efficiency, safety and reliability.
6. The drilling rig adopts the double plate normally closed friction clutch, which is flexible in opening and closing and convenient in operation and adjustment.
7. The gear box of the drilling rig adopts the structure of automobile gear box, with single handlebar speed change and interlock mechanism, which is convenient for operation.
8. The drilling machine is separated from the water pump, and the pump and the drilling machine are separately equipped with power, which can improve the output torque of the drilling machine, especially when entering the deep hole for drilling, there will be no contradiction in the use of the water pump due to the decrease of power, so as to avoid accidents in the hole.
9. The drilling rig is compact in structure, small in volume, light in weight, and the largest part is less than 100kg, which is convenient for disassembly and handling, and suitable for working in hills or mountains.
Core Drilling Machine,Core Bit,Core Hole Drill,Core Bit Set
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com